Dumps of AZ-104 Cover all the requirements of the Real Exam
Correct Practice Tests of AZ-104 Dumps with Practice Exam
The Best way to prepare for AZ-104 Exam
Microsoft AZ-104 exam is not at all easy for learners who are not prepared well for it. Pricing of the storage is based on the number of storage accounts, endpoints, operations and content stored in the account. Easily accessible data is required for the users, and it can be stored in S3 and blob storage. Instances and pods are the entry points of the storage. Evaluate the performance and storage of the storage is required for the users, and it can be done by adding and removing the volumes. Ability to recover the data is very important for the users of storage. Candidate needs to check the backup file as well as restore it after any failure. Ready access to the data is very important for the users, and it can be provided by using caches. Microsoft AZ-104 exam dumps are very popular among the candidates, and it is good for preparing well. Studying AZ-104:Microsoft Azure Administrator Exam topics to get the required experience and knowledge is a good way to prepare well for passing these exams. Individuals who want to pass the exams should make use of the exams' preparation material.
Guides are available online for candidates to prepare well for the exams. Troubleshoot the issues related to the storage. Availability of the resources is determined by the users, and it is measured by the response time. VPN and load balancing can be used for balancing the traffic between the VMs and network. Templates are used to create the templates. Zone replication is used for failover and high availability. Provide automatic failover for availability. Share the storage between the VMs. Expertise is required for configuring the load balancer.
Difficulty in Writing AZ-104:Microsoft Azure Administrator Exam
There may be certain difficulties in the AZ-104:Microsoft Azure Administrator Exam preparation due to several reasons. As these exams are held online, candidates need to be available at the exam centre on the scheduled date and time. This increases the level of anxiety and can affect their performance in such exams. Learners may face the problem of writing the exam as it is a tough examination. Started with two questions, the AZ-104:Microsoft Azure Administrator Exam has four sections. Password protection, time delay and re-writes are some features of this exam. Learners should know how to handle each of these situations which make the exam tougher. Microsoft AZ-104 exam dumps will help them to prepare for this exam. Guest sessions should check for all questions at once. Engine will help them to narrow down the right answer of the question. Online tests are preferred by many learners as they can practice whenever they want to.
Cluster test is preferred by candidates who are looking forward to increasing their knowledge about the subject. Demo helps the candidates to understand the concept. Demo and practice exams will help them to practice and understand the concept of Azure exam. Shared session helps you to compare and learn with other candidates who will be in the same situation. Preparing for AZ-104:Microsoft Azure Administrator Exam is not that easy and learners should take good care of their health while preparing for it. Downloading exam papers before the take the exam may not be good for them as they may not have all information related to this exam.
NEW QUESTION 122
You plan to create an Azure Storage account in the Azure region of East US 2.
You need to create a storage account that meets the following requirements:
Replicates synchronously
Remains available if a single data center in the region fails
How should you configure the storage account? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Reference:
https://docs.microsoft.com/en-us/azure/storage/common/storage-redundancy
https://docs.microsoft.com/en-us/azure/storage/common/storage-redundancy-zrs
NEW QUESTION 123
You have an Azure subscription named Subscription1 that contains an Azure Log Analytics workspace named Workspace1.
You need to view the error events from a table named Event.
Which query should you run in Workspace1?
- A. Get-Event Event | where {$_.EventType -eq "error"}
- B. Event | where EventType is "error"
- C. Event | search "error"
- D. select * from Event where EventType == "error"
Answer: C
Explanation:
Reference:
https://docs.microsoft.com/en-us/azure/azure-monitor/log-query/get-started-queries
NEW QUESTION 124
You have an Azure Kubernetes Service (AKS) cluster named AKS1 and a computer named Computer1 that runs Windows 10. Computer1 that has the Azure CLI installed.
You need to install the kubectl client on Computer1.
Which command should you run? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation:
To install kubectl locally, use the az aks install-cli command:
az aks install-cli
Reference:
https://docs.microsoft.com/en-us/azure/aks/kubernetes-walkthrough
NEW QUESTION 125
You have an Azure subscription that has a Recovery Services vault named Vault1. The subscription contains the virtual machines shown in the following table:
You plan to schedule backups to occur every night at 23:00.
Which virtual machines can you back up by using Azure Backup?
- A. VM1 and VM3 only
- B. VM1 only
- C. VM1, VM2, VM3 and VM4
- D. VM1 and VM2 only
Answer: C
Explanation:
Section: Monitor and back up Azure resources
Explanation:
Azure Backup supports backup of 64-bit Windows server operating system from Windows Server 2008.
Azure Backup supports backup of 64-bit Windows 10 operating system.
Azure Backup supports backup of 64-bit Ubuntu Server operating system from Ubuntu 12.04.
Azure Backup supports backup of VM that are shutdown or offline.
Reference:
https://docs.microsoft.com/en-us/azure/backup/backup-support-matrix-iaas
https://docs.microsoft.com/en-us/azure/virtual-machines/linux/endorsed-distros
NEW QUESTION 126
You plan to deploy five virtual machines to a virtual network subnet.
Each virtual machine will have a public IP address and a private IP address.
Each virtual machine requires the same inbound and outbound security rules.
What is the minimum number of network interfaces and network security groups that you require? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation
Box 1: 5
A public and a private IP address can be assigned to a single network interface.
Box 2: 1
You can associate zero, or one, network security group to each virtual network subnet and network interface in a virtual machine. The same network security group can be associated to as many subnets and network interfaces as you choose.
Reference:
https://docs.microsoft.com/en-us/azure/virtual-network/virtual-network-network-interface-addresses
NEW QUESTION 127
You have an Azure subscription named Subscription1 that contains the resources in the following table.
You install the Web Server server role (IIS) on WM1 and VM2, and then add VM1 and VM2 to LB1.
LB1 is configured as shown in the LB1 exhibit. (Click the Exhibit button.)
Rule1 is configured as shown in the Rule1 exhibit. (Click the Exhibit button.)
For each of the following statements, select Yes if the statement is true. Otherwise, select No.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
NEW QUESTION 128
You have an Azure Active Directory tenant named Contoso.com that includes following users:
Contoso.com includes following Windows 10 devices:
You create following security groups in Contoso.com:
For each of the following statements, select Yes if the statement is true. Otherwise, select No.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
References:
https://docs.microsoft.com/en-us/azure/active-directory/devices/overview
NEW QUESTION 129
You have an Azure subscription named Subscription1 that contains a virtual network named VNet1.
You add the users in the following table.
Which2? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation
Reference:
https://docs.microsoft.com/en-us/azure/role-based-access-control/built-in-roles
NEW QUESTION 130
HOTSPOT
You have an Azure subscription that contains the file shares shown in the following table.
You have the on-premises file shares shown in the following table.
You create an Azure file sync group named Sync1 and perform the following actions:
Add share1 as the cloud endpoint for Sync1.
Add data1 as a server endpoint for Sync1.
Register Server1 and Server2 to Sync1
.
For each of the following statements, select Yes if the statement is true. Otherwise, select No.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Reference:
https://docs.microsoft.com/en-us/azure/storage/files/storage-sync-files-deployment-guide?tabs=azure-portal%2Cproactive-portal#create-a-sync-group-and-a-cloud-endpoint
NEW QUESTION 131
You have Azure virtual machines that run Windows Server 2019 and are configured as shown in the following table.
You create a public Azure DNS zone named adatum.com and a private Azure DNS zone named contoso.com.
For contoso.com, you create a virtual network link named link1 as shown in the exhibit. (Click the Exhibit tab.)
You discover that VM1 can resolve names in contoso.com but cannot resolve names in adatum.com. VM1 can resolve other hosts on the internet.
You need to ensure that VM1 can resolve host names in adatum.com.
What should you do?
- A. Modify the Access control (IAM) settings for link1.
- B. Create an SRV record in the contoso.com zone.
- C. Configure the name servers for adatum.com at the domain registrar.
- D. Update the DNS suffix on VM1 to be adatum.com.
Answer: A
NEW QUESTION 132
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have an Azure web app named App1. App1 runs in an Azure App Service plan named Plan1. Plan1 is associated to the Free pricing tier.
You discover that App1 stops each day after running continuously for 60 minutes.
You need to ensure that App1 can run continuously for the entire day.
Solution: You add a continuous WebJob to App1.
Does this meet the goal?
- A. No
- B. Yes
Answer: A
NEW QUESTION 133
You have a virtual network named VNet1 that has the configuration shown in the following exhibit.
Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation
Box 1: add an address space
Your IaaS virtual machines (VMs) and PaaS role instances in a virtual network automatically receive a private IP address from a range that you specify, based on the address space of the subnet they are connected to. We need to add the 192.168.1.0/24 address space.
Box 2: add a subnet
Address space is present but need to add subnet
References:
https://docs.microsoft.com/en-us/microsoft-365/solutions/cloud-architecture-models?view=o365-worldwide
https://docs.microsoft.com/en-us/azure/virtual-network/virtual-networks-static-private-ip-arm-pportal
NEW QUESTION 134
You have a hybrid deployment of Azure Active Directory (Azure AD) that contains the users shown in the following table.
You need to modify the JobTitle and UsageLocation attributes for the users.
For which users can you modify the- attributes from Azure AD? To answer, select the appropriate options in the answer area.
Answer:
Explanation:
NEW QUESTION 135
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
Your company registers a domain name of contoso.com.
You create an Azure DNS zone named contoso.com, and then you add an A record to the zone for a host named www that has an IP address of 131.107.1.10.
You discover that Internet hosts are unable to resolve www.contoso.com to the 131.107.1.10 IP address.
You need to resolve the name resolution issue.
Solution: You add an NS record to the contoso.com Azure DNS zone.
- A. No
- B. Yes
Answer: A
Explanation:
Before you can delegate your DNS zone to Azure DNS, you need to know the name servers for your zone.
The NS record set contains the names of the Azure DNS name servers assigned to the zone.
References:
https://docs.microsoft.com/en-us/azure/dns/dns-delegate-domain-azure-dns
NEW QUESTION 136
You have an Azure subscription that contains the resources shown in the following table.
You need to configure a proximity placement group for VMSS1 Which proximity placement groups should you use?
- A. Proximity 1, Proximity2, and Proximity3
- B. Proximity 1 and Proximity3 only
- C. Proximity1 only
- D. Proximity2 only
Answer: B
NEW QUESTION 137
You have the Azure virtual networks shown in the following table.
To which virtual networks can you establish a peering connection from VNet1?
- A. VNet2, VNet3, and VNet4
- B. VNet3 and VNet4 only
- C. VNet2 only
- D. VNet2 and VNet3 only
Answer: B
Explanation:
Reference:
https://docs.microsoft.com/en-us/azure/virtual-network/tutorial-connect-virtual-networks-portal
You can connect virtual networks to each other with virtual network peering. These virtual networks can be in the same region or different regions (also known as Global VNet peering). Once virtual networks are peered, resources in both virtual networks are able to communicate with each other, with the same latency and bandwidth as if the resources were in the same virtual network.
Global VNet Peering is now generally available in all Azure public regions, excluding the China, Germany, and Azure Government regions.
The address space is the most critical configuration for a VNet in Azure. This is the IP range for the entire network that will be divided into subnets. The address space can almost be any IP range that you wish (public or private). You can add multiple address spaces to a VNet. To ensure this VNet can be connected to other networks, the address space should never overlap with any other networks in your environment. If a VNet has an address space that overlaps with another Azure VNet or on-premises network, the networks cannot be connected, as the routing of traffic will not work properly.
https://docs.microsoft.com/en-us/azure/virtual-network/tutorial-connect-virtual-networks-portal
https://azure.microsoft.com/en-in/updates/general-availability-global-vnet-peering/#:~:text=Global%20VNet%20Peering%20is%20now,transit%20over%20the%20public%20internet.
https://www.microsoftpressstore.com/articles/article.aspx?p=2873369
NEW QUESTION 138
You have an existing Azure subscription that contains 10 virtual machines.
You need to monitor the latency between your on-premises network and the virtual machines.
What should you use?
- A. Connection troubleshoot
- B. Service Map
- C. Effective routes
- D. Network Performance Monitor
Answer: D
Explanation:
Explanation
Network Performance Monitor is a cloud-based hybrid network monitoring solution that helps you monitor network performance between various points in your network infrastructure. It also helps you monitor network connectivity to service and application endpoints and monitor the performance of Azure ExpressRoute.
You can monitor network connectivity across cloud deployments and on-premises locations, multiple data centers, and branch offices and mission-critical multitier applications or microservices. With Performance Monitor, you can detect network issues before users complain.
Reference:
https://docs.microsoft.com/en-us/azure/azure-monitor/insights/network-performance-monitor
NEW QUESTION 139
You have an Azure subscription.
You deploy a virtual machine scale set that is configured as shown in the following exhibit.
Use the drop-down menus to select the answer choice that answers each question based on the information presented in the graphic NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Reference:
https://docs.microsoft.com/en-us/azure/virtual-machine-scale-sets/virtual-machine-scale-sets-autoscale-portal
NEW QUESTION 140
You have an Azure subscription that contains the resources in the following table.
To which subnets can you apply NSG1?
- A. the subnets on VNet1, VNet2, and VNet3
- B. the subnets on VNet2 only
- C. the subnets on VNet2 and VNet3 only
- D. the subnets on VNet1 only
- E. the subnets on VNet3 only
Answer: E
Explanation:
All Azure resources are created in an Azure region and subscription. A resource can only be created in a virtual network that exists in the same region and subscription as the resource.
Reference:
https://docs.microsoft.com/en-us/azure/virtual-network/virtual-network-vnet-plan-design-arm
NEW QUESTION 141
You sign up for Azure Active Directory (Azure AD) Premium.
You need to add a user named [email protected] as an administrator on all the computers that will be joined to the Azure AD domain.
What should you configure in Azure AD?
- A. Device settings from the Devices blade.
- B. User settings from the Users blade.
- C. Providers from the MFA Server blade.
- D. General settings from the Groups blade.
Answer: A
Explanation:
When you connect a Windows device with Azure AD using an Azure AD join, Azure AD adds the following security principles to the local administrators group on the device:
The Azure AD global administrator role
The Azure AD device administrator role
The user performing the Azure AD join
In the Azure portal, you can manage the device administrator role on the Devices page. To open the Devices page:
1. Sign in to your Azure portal as a global administrator or device administrator.
2. On the left navbar, click Azure Active Directory.
3. In the Manage section, click Devices.
4. On the Devices page, click Device settings.
5. To modify the device administrator role, configure Additional local administrators on Azure AD joined devices.
References:
https://docs.microsoft.com/en-us/azure/active-directory/devices/assign-local-admin
NEW QUESTION 142
Hotspot Question
You have an Azure subscription named Subscription1.
You have a virtualization environment that contains the virtualization servers in the following table.
The virtual machines are configured as shown in the following table.
All the virtual machines use basic disks. VM1 is protected by using BitLocker Drive Encryption (BitLocker).
You plan to use Azure Site Recovery to migrate the virtual machines to Azure. Which virtual machines can you migrate? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation:
Box 1: VM3
Not VM1 as Bitlocker is not supported. BitLocker must be disabled before you enable replication for a VM.
Not VM2 as maximum Operating system disk size for a generation VM is 2,048 GB.
Box 2: VMA and VMB only
Not VMC as the max data disk size is 4,095 GB
References:
https://docs.microsoft.com/en-us/azure/site-recovery/hyper-v-azure-support-matrix
https://docs.microsoft.com/en-us/azure/site-recovery/vmware-physical-azure-support- matrix#azure-vm-requirements
NEW QUESTION 143
You are creating an Azure Kubernetes Services (AKS) cluster as shown in the following exhibit.
Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic NOTE; Each correct selection is worth one point.
Answer:
Explanation:
NEW QUESTION 144
You have an Azure subscription named Subscription1 that contains the resources in the following table.
VM1 and VM2 run the websites in the following table.
AppGW1 has the backend pools in the following table.
DNS resolves site1.contoso.com, site2.contoso.com, and site3.contoso.com to the IP address of AppGW1.
AppGW1 has the listeners in the following table.
AppGW1 has the rules in the following table.
For each of the following statements, select Yes if the statement is true. Otherwise, select No.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
NEW QUESTION 145
......
Module 5: Azure Resources Monitoring and Backup
The last exam unit is all about Azure resource monitoring and back up. From this module, Microsoft AZ-104 aspirants can expect questions dedicated to log analysis, metrics interpretation, and set up actions as well as alerts. How to conduct back-up and recovery for Azure is also explained in this section.
Sample Questions of AZ-104 Dumps With 100% Exam Passing Guarantee: https://www.dumpexams.com/AZ-104-real-answers.html
Pass Key features of AZ-104 Course with Updated 520 Questions: https://drive.google.com/open?id=14qcNVPzk0RrcaUyKgnQBtED0TL3iy43k