DumpExams is an authorized company offering valid and latest dump exams & dumps VCE materials. Our dump exams & dumps VCE materials are high-quality; our passing rate is higher than others.

[Q24-Q42] Verified 500-220 dumps Q&As - Pass Guarantee or Full Refund [Nov-2021]

Share

Verified 500-220 dumps Q&As - Pass Guarantee or Full Refund [Nov-2021]

500-220 PDF Dumps | Nov 22, 2021 Recently Updated Questions 


Cisco 500-220 Exam Syllabus Topics:

TopicDetails
Topic 1
  • Design stable, secure, and scalable routing deployments
  • Explain Cisco Meraki cloud architecture
Topic 2
  • Sentry for Meraki managed deployments
  • Design scalable Meraki Auto VPN architectures
Topic 3
  • Alerts with Dashboard, SNMP, Syslog and Netflow in Dashboard
  • Security threats using Security Center
Topic 4
  • Application performance issues using Meraki Insight
  • Describe how to use the dashboard API to monitor and maintain networks
Topic 5
  • Device enrollment such as supervised and device owner
  • Interpret information from monitoring and reporting tools
Topic 6
  • Compare endpoint device and application management methods
  • Design dynamic path selection policies
Topic 7
  • Threat protection and content filtering rules
  • Explain access methods to dashboard and devices
Topic 8
  • Design Enterprise wireless services
  • Configuring MR wireless access points
Topic 9
  • SSIDs for Enterprise and BYOD deployments
  • Cisco Meraki Cloud Management
Topic 10
  • Explain organizational structure, segmentation and permissions
  • Explain licensing, co-termination, and renewals
Topic 11
  • Troubleshooting Enterprise networks
  • Compare deployment workflows
Topic 12
  • Redundant networks and high availability
  • Explain deployment consideration for the vMX
Topic 13
  • Wireless client connectivity issues using Dashboard
  • Network access control solutions

 

NEW QUESTION 24
Refer to the exhibit.

Assuming this MX has established a full tunnel with its VPN peer, how will the MX route the WebEx traffic?

  • A. WebEx traffic will prefer WAN 2 as long as it is up.
  • B. WebEx traffic will be load-balanced between both active WAN links.
  • C. WebEx traffic will prefer WAN 1 as it is the primary uplink.
  • D. WebEx traffic will prefer WAN 2 as long as it meets the thresholds in the "Conf" performance class.

Answer: C

 

NEW QUESTION 25
Which two Systems Manager Live tools are available only for Apple Macs and Windows PCs and cannot be used on iOS or Android mobile devices? (Choose two.)

  • A. Remote Desktop
  • B. OS updates
  • C. Send notification
  • D. Selective wipe
  • E. Screenshot

Answer: A,D

 

NEW QUESTION 26
What are two organization permission types? (Choose two.)

  • A. Read-only
  • B. Monitor-only
  • C. Full
  • D. Write-only
  • E. Write

Answer: A,C

Explanation:
Reference:
Managing_Dashboard_Administrators_and_Permissions

 

NEW QUESTION 27
For which two reasons can an organization become "Out of License"? (Choose two.)

  • A. MR licenses that do not match the MR models in the organization
  • B. licenses that are in the wrong network
  • C. expired device license
  • D. licenses that do not match the serial numbers in the organization
  • E. more hardware devices than device licenses

Answer: C,E

 

NEW QUESTION 28
What is the best practice Systems Manager enrollment method when deploying corporate-owned iOS devices?

  • A. DEP
  • B. Apple Configurator
  • C. Sentry enrollment
  • D. manual

Answer: B

 

NEW QUESTION 29
Refer to the exhibit.

What does the MX Security Appliance send to determine whether VPN traffic exceeds the configured latency threshold in the VoIP custom performance class?

  • A. 100-byte UDP probes every second, through VPN tunnels that are established over the primary WAN link.
  • B. 1000-byte TCP probes every second, through VPN tunnels that are established over the primary WAN link.
  • C. 100-byte UDP probes every second, through VPN tunnels that are established over every WAN link.
  • D. 1000-byte TCP probes every second, through VPN tunnels that are established over every WAN link.

Answer: D

 

NEW QUESTION 30
Which type of authentication protocol is used when using OSPF on an MX appliance?

  • A. SHA-1
  • B. plaintext
  • C. certificate
  • D. MD5

Answer: D

Explanation:
Reference:
Using_OSPF_to_Advertise_Remote_VPN_Subnets

 

NEW QUESTION 31
Which two actions can extend the video retention of a Cisco Meraki MV Smart Camera? (Choose two.)

  • A. enabling motion-based retention
  • B. enabling audio compression
  • C. installing an SSD memory extension
  • D. configuring a recording schedule
  • E. enabling maximum retention limit

Answer: A,D

 

NEW QUESTION 32
A new application needs to be pushed to all iOS devices. Some devices report "NotNow" in the event log and do not install the application.
What does the "NotNow" event indicate?

  • A. The application requires the most recent iOS version.
  • B. The device cannot connect to Apple servers.
  • C. The device is locked with a passcode.
  • D. The device cannot connect to Cisco Meraki servers.

Answer: C

 

NEW QUESTION 33
Refer to the exhibit.

The VPN concentrator is experiencing issues. Which action should be taken to ensure a stable environment?

  • A. Remove the connection from Internet 1.
  • B. Physically disconnect all LAN ports.
  • C. Add a deny any/any firewall rule to the end of the firewall rules.
  • D. Configure the MX appliance to Routed mode on the Addressing & VLANS page.

Answer: B

 

NEW QUESTION 34
Refer to the exhibit.

A packet arrives on the VPN concentrator with source IP 10.168.70.3 and destined for IP 10.116.32.4.
What is the next hop for the packet, based on this concentrator routing table?

  • A. The packet is stopped.
  • B. Not enough detail is available to determine the next hop.
  • C. The Auto VPN peer "Store 1532 - appliance" is the next hop.
  • D. The concentrator gateway (10.128.124.62) is the next hop.

Answer: B

 

NEW QUESTION 35
Refer to the exhibit.

Which two actions are required to optimize load balancing asymmetrically with a 4:1 ratio between links? (Choose two.)

  • A. Set the speed of the cellular uplink to zero.
  • B. Enable load balancing.
  • C. Add an internet traffic preference that defines the load-balancing ratio as 4:1.
  • D. Change the assigned speeds of WAN 1 and WAN 2 so that the ratio is 4:1.
  • E. Change the primary uplink to "none".

Answer: B,C

 

NEW QUESTION 36
Which configuration step is necessary when automatic updating is required of iOS apps provisioned through Systems Manager that are found in the App Store?

  • A. No configuration step is necessary; automatic updating is the default behavior.
  • B. Create a security policy that enables automatic updates.
  • C. Configure automatic updating of iOS devices in the Meraki installed profile.
  • D. Create a profile with automatic update enabled and apply it to iOS devices.

Answer: B

 

NEW QUESTION 37
When wireless SSIDs are configured in Dashboard, which setting on the Access Control page affects the ability of a 2.4 GHz only client device from associating to the WLAN for the first time?

  • A. Dual band operating with Band Steering
  • B. Content filtering
  • C. 802.11r
  • D. Bridge mode

Answer: A

 

NEW QUESTION 38
What is a feature of distributed Layer 3 roaming?

  • A. An MX Security Appliance is required as a concentrator.
  • B. All wireless client traffic can be split-tunneled.
  • C. All wireless client traffic is tunneled.
  • D. An MX Security Appliance is not required as a concentrator.

Answer: D

Explanation:
Reference:
Cisco_Meraki_Best_Practice_Design/Best_Practice_Design_-_MR_Wireless/
Wireless_Layer_3_Roaming_Best_Practices

 

NEW QUESTION 39
Which three verbs of request are available in the Cisco Meraki API? (Choose three.)

  • A. ADD
  • B. POST
  • C. PUT
  • D. GET
  • E. SET
  • F. PATCH

Answer: B,C,D

Explanation:
Reference:
Cisco_Meraki_Dashboard_API

 

NEW QUESTION 40
Where should a network admin navigate to investigate wireless mesh information between Meraki APs?

  • A. Wireless > Monitor > Access Points > AP > RF
  • B. Wireless > Monitor > RF Spectrum
  • C. Wireless > Configure > Radio Settings
  • D. Wireless > Monitor > Wireless Health

Answer: A

 

NEW QUESTION 41
A customer requires a hub-and-spoke Auto VPN deployment with two NAT-mode hubs with dual uplink connections and 50 remote sites with a single uplink connection.
How many tunnels does each hub need to support?

  • A. 0
  • B. 1
  • C. 2
  • D. 3

Answer: A

 

NEW QUESTION 42
......

500-220 Exam Questions – Valid 500-220 Dumps Pdf: https://www.dumpexams.com/500-220-real-answers.html

500-220 Practice Test Questions Answers Updated 58 Questions: https://drive.google.com/open?id=1FF_GoOfXeHgIGQEwJh0p1mQk_q7o2GLj