[2025] AZ-500 Actual Exam Dumps, AZ-500 Practice Test
Dumpexams AZ-500 dumps & Microsoft Azure Security Engineer Associate sure practice dumps
The Microsoft AZ-500 exam consists of a variety of question types, including multiple choice, case studies, and drag-and-drop questions. AZ-500 exam is designed to test both theoretical knowledge and practical application of Azure security concepts. Candidates are given 150 minutes to complete the exam and must score at least 700 out of 1000 points to pass.
NEW QUESTION # 212
You have an Azure subscription that contains an Azure key vault named ContosoKey1.
You create users and assign them roles as shown in the following table.
You need to identify which users can perform the following actions:
Delegate permissions for ContsosKey1.
Configure network access to ContosoKey1.
Which users should you identify? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation:
Reference:
https://docs.microsoft.com/en-gb/azure/key-vault/general/rbac-guide
NEW QUESTION # 213
You have the Azure key vaults shown in the following table.
KV1 stores a secret named Secret1 and a key for a managed storage account named Key1.
You back up Secret1 and Key1.
To which key vaults can you restore each backup? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation
The backups can only be restored to key vaults in the same subscription and same geography. You can restore to a different region in the same geography.
https://docs.microsoft.com/en-us/azure/key-vault/general/backup?tabs=azure-cli
NEW QUESTION # 214
You have an Azure subscription that contains the resources shown in the following table.
You create the Azure Storage accounts shown in the following table.
You need to configure auditing for SQL1.
Which storage accounts and Log Analytics workspaces can you use as the audit log destination? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
NEW QUESTION # 215
You have a network security group (NSG) bound to an Azure subnet.
You run Get-AzureRmNetworkSecurityRuleConfig and receive the output shown in the following exhibit.
Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation
Box 1: able to connect to East US 2
The StorageEA2Allow has DestinationAddressPrefix {Storage/EastUS2}
Box 2: allowed
TCP Port 21 controls the FTP session. Contoso_FTP has SourceAddressPrefix {1.2.3.4/32} and DestinationAddressPrefix {10.0.0.5/32} Note:
The Get-AzureRmNetworkSecurityRuleConfig cmdlet gets a network security rule configuration for an Azure network security group.
Security rules in network security groups enable you to filter the type of network traffic that can flow in and out of virtual network subnets and network interfaces.
Reference:
https://docs.microsoft.com/en-us/azure/virtual-network/manage-network-security-group
NEW QUESTION # 216
You have an Azure subscription that contains the resources shown in the following table.
An IP address of 10.1.0.4 is assigned to VM5. VM5 does not have a public IP address.
VM5 has just in time (JIT) VM access configured as shown in the following exhibit.
You enable JIT VM access for VM5.
NSG1 has the inbound rules shown in the following exhibit.
For each of the following statements, select Yes if the statement is true. Otherwise, select No.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
NEW QUESTION # 217
You need to deploy AKS1 to meet the platform protection requirements.
Which four actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
NOTE: More than one order of answer choices is correct. You will receive credit for any of the correct orders you select.
Answer:
Explanation:
Scenario: Azure AD users must be to authenticate to AKS1 by using their Azure AD credentials.
Litewire plans to deploy AKS1, which is a managed AKS (Azure Kubernetes Services) cluster.
Step 1: Create a server application
To provide Azure AD authentication for an AKS cluster, two Azure AD applications are created. The first application is a server component that provides user authentication.
Step 2: Create a client application
The second application is a client component that's used when you're prompted by the CLI for authentication.
This client application uses the server application for the actual authentication of the credentials provided by the client.
Step 3: Deploy an AKS cluster.
Use the az group create command to create a resource group for the AKS cluster.
Use the az aks create command to deploy the AKS cluster.
Step 4: Create an RBAC binding.
Before you use an Azure Active Directory account with an AKS cluster, you must create role-binding or cluster role-binding. Roles define the permissions to grant, and bindings apply them to desired users. These assignments can be applied to a given namespace, or across the entire cluster.
Reference:
https://docs.microsoft.com/en-us/azure/aks/azure-ad-integration
NEW QUESTION # 218
You have an Azure subscription named Subscription1 that contains the resources shown in the following table.
You need to identify which initiatives and policies you can add to Subscription1 by using Azure Security Center.
What should you identify?
- A. Initiative1 and Initiative2 only
- B. Initiative1, Initiative2, Policy1, and Policy2
- C. Policy1 and Policy2 only
- D. Initiative1 only
Answer: B
Explanation:
Reference:
https://docs.microsoft.com/en-us/azure/security-center/custom-security-policies
NEW QUESTION # 219
You have a Microsoft Entra tenant that contains the users shown in the following table.
You create and enforce a Microsoft Entra Identity Protection sign-in risk policy that has the following settings:
* Assignments: Include Group1, exclude Group2
* Conditions: Sign-in risk level: Low and above
* Access: Allow access, Require multi-factor authentication
You need to identify what occurs when the users sign in to Microsoft Entra ID.
What should you identify for each user? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
NEW QUESTION # 220
You have an Azure subscription that contains the key vaults shown in the following table.
The subscription contains the users shown in the following table.
On June 1, you perform the following actions:
* Delete a key named key1 from KeyVault1.
* Delete a secret named secret 1 from KeyVault2.
For each of the following statements, select Yes if the statement is true. Otherwise, select No.
Answer:
Explanation:
NEW QUESTION # 221
You have the hierarchy of Azure resources shown in the following exhibit.
You create the Azure Blueprints definitions shown in the following table.
To which objects can you assign Blueprint1 and Blueprint2? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
NEW QUESTION # 222
You need to delegate the creation of RG2 and the management of permissions for RG1. Which users can perform each task? To answer select the appropriate options in the answer are a. NOTE: Each correct selection is worth one point
Answer:
Explanation:
NEW QUESTION # 223
You have the hierarchy of Azure resources shown in the following exhibit.
RG1, RG2, and RG3 are resource groups.
RG2 contains a virtual machine named VM1.
You assign role-based access control (RBAC) roles to the users shown in the following table.
For each of the following statements, select Yes if the statement is true. Otherwise, select No.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
NEW QUESTION # 224
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have a hybrid configuration of Azure Active Directory (AzureAD).
You have an Azure HDInsight cluster on a virtual network.
You plan to allow users to authenticate to the cluster by using their on-premises Active Directory credentials.
You need to configure the environment to support the planned authentication.
Solution: You deploy the On-premises data gateway to the on-premises network.
Does this meet the goal?
- A. Yes
- B. No
Answer: B
Explanation:
Instead, you connect HDInsight to your on-premises network by using Azure Virtual Networks and a VPN gateway.
Note: To allow HDInsight and resources in the joined network to communicate by name, you must perform the following actions:
Create Azure Virtual Network.
Create a custom DNS server in the Azure Virtual Network.
Configure the virtual network to use the custom DNS server instead of the default Azure Recursive Resolver.
Configure forwarding between the custom DNS server and your on-premises DNS server.
References:
https://docs.microsoft.com/en-us/azure/hdinsight/connect-on-premises-network
NEW QUESTION # 225
Use the following login credentials as needed:
To enter your username, place your cursor in the Sign in box and click on the username below.
To enter your password, place your cursor in the Enter password box and click on the password below.
Azure Username: [email protected]
Azure Password: Ag1Bh9!#Bd
The following information is for technical support purposes only:
Lab Instance: 10598168
You need to collect all the audit failure data from the security log of a virtual machine named VM1 to an Azure Storage account.
To complete this task, sign in to the Azure portal.
This task might take several minutes to complete You can perform other tasks while the task completes.
Answer:
Explanation:
See the explanation below.
Explanation
Step 1: Create a workspace
Azure Monitor can collect data directly from your Azure virtual machines into a Log Analytics workspace for detailed analysis and correlation.
1. In the Azure portal, select All services. In the list of resources, type Log Analytics. As you begin typing, the list filters based on your input. Select Log Analytics workspaces.
2. Select Create, and then select choices for the following items:
3. After providing the required information on the Log Analytics workspace pane, select OK.
While the information is verified and the workspace is created, you can track its progress under Notifications from the menu.
Step 2: Enable the Log Analytics VM Extension
Installing the Log Analytics VM extension for Windows and Linux allows Azure Monitor to collect data from your Azure VMs.
1. In the Azure portal, select All services found in the upper left-hand corner. In the list of resources, type Log Analytics. As you begin typing, the list filters based on your input. Select Log Analytics workspaces.
2. In your list of Log Analytics workspaces, select DefaultWorkspace (the name you created in step 1).
3. On the left-hand menu, under Workspace Data Sources, select Virtual machines.
4. In the list of Virtual machines, select a virtual machine you want to install the agent on. Notice that the Log Analytics connection status for the VM indicates that it is Not connected.
5. In the details for your virtual machine, select Connect. The agent is automatically installed and configured for your Log Analytics workspace. This process takes a few minutes, during which time the Status shows Connecting.
After you install and connect the agent, the Log Analytics connection status will be updated with This workspace.
Reference: https://docs.microsoft.com/en-us/azure/azure-monitor/learn/quick-collect-azurevm
NEW QUESTION # 226
Use the following login credentials as needed:
To enter your username, place your cursor in the Sign in box and click on the username below.
To enter your password, place your cursor in the Enter password box and click on the password below.
Azure Username: [email protected]
Azure Password: Ag1Bh9!#Bd
The following information is for technical support purposes only:
Lab Instance: 10598168
The developers at your company plan to create a web app named App10598168 and to publish the app to
https://www.contoso.com.
You need to perform the following tasks:
* Ensure that App10598168 is registered to Azure Active Directory (Azure AD).
* Generate a password for App10598168.
To complete this task, sign in to the Azure portal.
Answer:
Explanation:
See the explanation below.
Explanation
Step 1: Register the Application
1. Sign in to your Azure Account through the Azure portal.
2. Select Azure Active Directory.
3. Select App registrations.
4. Select New registration.
5. Name the application App10598168 . Select a supported account type, which determines who can use the application. Under Redirect URI, select Web for the type of application you want to create. Enter the URI:
https://www.contoso.com , where the access token is sent to.
6. Click Register
Step 2: Create a new application secret
If you choose not to use a certificate, you can create a new application secret.
7 Select Certificates & secrets.
8. Select Client secrets -> New client secret.
9. Provide a description of the secret, and a duration. When done, select Add.
After saving the client secret, the value of the client secret is displayed. Copy this value because you aren't able to retrieve the key later. You provide the key value with the application ID to sign in as the application.
Store the key value where your application can retrieve it.
Reference:
https://docs.microsoft.com/en-us/azure/active-directory/develop/howto-create-service-principal-portal
NEW QUESTION # 227
Your network contains an on-premises Active Directory domain named adatum.com that syncs to Azure Active Directory (Azure AD).
The Azure AD tenant contains the users shown in the following table.
You configure the Authentication methods - Password Protection settings for adatum.com as shown in the following exhibit.
For each of the following statements, select Yes if the statement is true. Otherwise, select No.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Reference:
https://docs.microsoft.com/en-us/azure/active-directory/authentication/howto-password-ban-bad-on-premises-deploy
https://docs.microsoft.com/en-us/azure/active-directory/authentication/concept-password-ban-bad
NEW QUESTION # 228
You have an Azure Active Directory (Azure AD) tenant named contoso1812.onmicrosoft.com that contains the users shown in the following table.
You create an Azure Information Protection label named Label1. The Protection settings for Label1 are configured as shown in the exhibit. (Click the Exhibit tab.)
Label1 is applied to a file named File1.
For each of the following statements, select Yes if the statement is true, Otherwise, select No.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
NEW QUESTION # 229
Your network contains an on-premises Active Directory domain named contoso.com. The domain contains a user named User1.
You have an Azure subscription that is linked to an Azure Active Directory (Azure AD) tenant named contoso.com. The tenant contains an Azure Storage account named storage1. Storage1 contains an Azure file share named share1.
Currently, the domain and the tenant are not integrated.
You need to ensure that User1 can access share1 by using his domain credentials.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Explanation:
Reference:
https://docs.microsoft.com/en-us/azure/security-center/security-center-compliance-dashboard
NEW QUESTION # 230
Your company has an Azure subscription named Subscription1. Subscription1 is associated with the Azure Active Directory tenant that includes the users shown in the following table.
The company is sold to a new owner.
The company needs to transfer ownership of Subscription1.
Which user can transfer the ownership and which tool should the user use? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Reference:
https://docs.microsoft.com/en-us/azure/cost-management-billing/manage/billing-subscription-transfer
NEW QUESTION # 231
You have an Azure subscription that contains an Azure Active Directory (Azure AD) tenant.
When a developer attempts to register an app named App1 in the tenant, the developer receives the error message shown in the following exhibit.
You need to ensure that the developer can register App1 in the tenant.
What should you do for the tenant?
- A. Modify the User settings
- B. Modify the Directory properties.
- C. Configure the Consent and permissions settings for enterprise applications.
- D. Set Enable Security default to Yes.
Answer: A
Explanation:
Reference:
https://docs.microsoft.com/en-us/azure/active-directory/develop/active-directory-how-applications-are-added
NEW QUESTION # 232
You have an Azure subscription.
You plan to create a workflow automation in Azure Security Center that will automatically remediate a security vulnerability.
What should you create first?
- A. an Azure function app
- B. an Azure logic app
- C. an alert rule
- D. a managed identity
- E. an automation account
Answer: B
Explanation:
Reference:
https://docs.microsoft.com/en-us/azure/security-center/workflow-automation
NEW QUESTION # 233
You have an Azure subscription.
You need to create and deploy an Azure policy that meets the following requirements:
When a new virtual machine is deployed, automatically install a custom security extension.
Trigger an autogenerated remediation task for non-compliant virtual machines to install the extension.
What should you include in the policy? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Reference:
https://docs.microsoft.com/en-us/azure/governance/policy/how-to/remediate-resources
NEW QUESTION # 234
You have an Azure Active Directory (Azure AD) tenant named contoso1812.onmicrosoft.com that contains the users shown in the following table.
You create an Azure Information Protection label named Label1. The Protection settings for Label1 are configured as shown in the exhibit. (Click the Exhibit tab.)
Label1 is applied to a file named File1.
For each of the following statements, select Yes if the statement is true, Otherwise, select No.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
NEW QUESTION # 235
You have the Azure Information Protection conditions shown in the following table.
You need to identify how Azure Information Protection will label files.
What should you identify? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Reference:
https://docs.microsoft.com/en-us/azure/information-protection/configure-policy-classification
NEW QUESTION # 236
......
AZ-500 Actual Questions and Braindumps: https://www.dumpexams.com/AZ-500-real-answers.html
Pass AZ-500 Exam with Updated AZ-500 Exam Dumps PDF 2025: https://drive.google.com/open?id=1sjyzsmgPSc8rCZSFDaqVwUKElEYEFaJm