Apr-2026 Latest Dumpexams 156-215.82 Exam Dumps with PDF and Exam Engine Free Updated Today!
Following are some new 156-215.82 Real Exam Questions!
NEW QUESTION # 191
Which of the following is NOT a component of a Distinguished Name?
- A. Common Name
- B. User container
- C. Country
- D. Organizational Unit
Answer: B
Explanation:
A Distinguished Name (DN) is a unique identifier for an entry in an LDAP directory. A DN consists of a sequence of relative distinguished names (RDNs) separated by commas. Each RDN is composed of an attribute type and an attribute value, such as cn=John Smith or ou=Sales. A DN can have different components depending on the structure and schema of the LDAP directory, but some common components are: Common Name (cn), Country , Organizational Unit (ou), Organization (o), State or Province (st), and Locality (l).User container is not a component of a DN3. Check Point R81 Identity Awareness Administration Guide
NEW QUESTION # 192
A security zone is a group of one or more network interfaces from different centrally managed gateways. What is considered part of the zone?
- A. The zone is based on the network topology and determined according to where the interface leads to.
- B. The local directly connected subnet defined by the subnet IP and subnet mask.
- C. Security Zones are not supported by Check Point firewalls.
- D. The firewall rule can be configured to include one or more subnets in a zone.
Answer: A
Explanation:
A security zone is a group of one or more network interfaces from different centrally managed gateways that have the same security requirements. The zone is based on the network topology and determined according to where the interface leads to. For example, a zone can be defined as internal, external, DMZ, VPN, etc. Security zones are supported by Check Point firewalls and can be used to simplify security policies and network segmentation. The firewall rule can be configured to include one or more zones as source or destination objects. The local directly connected subnet defined by the subnet IP and subnet mask is not considered part of the zone, but rather a property of the interface.[Security Zones], [Security Zones Best Practices]
NEW QUESTION # 193
The SIC Status "Unknown" means
- A. There is no connection between the gateway and Security Management Server.
- B. The Security Management Server can contact the gateway, but cannot establish SIC.
- C. There is connection between the gateway and Security Management Server but it is not trusted.
- D. The secure communication is established.
Answer: A
Explanation:
The SIC Status "Unknown" means that there is no connection between the gateway and Security Management Server.This can happen if the gateway is down, unreachable, or has not been initialized yet12. Check Point R81 Security Management Administration Guide,Free Check Point CCSA Sample Questions and Study Guide
NEW QUESTION # 194
Which of the following is used to initially create trust between a Gateway and Security Management Server?
- A. One-time Password
- B. Token
- C. Internal Certificate Authority
- D. Certificate
Answer: A
Explanation:
A one-time password is used to initially create trust between a Gateway and Security Management Server. The administrator generates a one-time password from SmartConsole and enters it on the gateway command line interface using the cpconfig command. This establishes a Secure Internal Communication (SIC) between the gateway and the server . The other options are not used for this purpose. [Configuring Secure Internal Communication (SIC)], [Check Point CCSA - R81: Practice Test & Explanation]
NEW QUESTION # 195
Which type of attack can a firewall NOT prevent?
- A. Network Bandwidth Saturation
- B. SQL Injection
- C. SYN Flood
- D. Buffer Overflow
Answer: A
Explanation:
A firewall can NOT prevent a network bandwidth saturation attack, which is a type of denial-of-service (DoS) attack that aims to consume all the available bandwidth of a target network or device1, p. 9.A firewall can prevent other types of attacks, such as buffer overflow, SYN flood, and SQL injection, by inspecting packets and applying security rules2, p. 11-12. Check Point CCSA - R81: Practice Test & Explanation,156-315.81 Checkpoint Exam Info and Free Practice Test
NEW QUESTION # 196
When installing a dedicated R80 SmartEvent server, what is the recommended size of the root partition?
- A. At least 20GB
- B. More than 10GB and less than 20 GB
- C. Any size
- D. Less than 20GB
Answer: A
Explanation:
The correct answer is D because the recommended size of the root partition for a dedicated R80 SmartEvent server is at least 20GB2. Any size, less than 20GB, or more than 10GB and less than 20GB are not sufficient for the SmartEvent server. Check Point R80.40 Installation and Upgrade Guide
NEW QUESTION # 197
In order to modify Security Policies, the administrator can use which of the following tools? (Choose the best answer.)
- A. SmartConsole or mgmt_cli (API) on any computer where SmartConsole is installed.
- B. SmartConsole and WebUI on the Security Management Server.
- C. Command line of the Security Management Server or mgmt_cli.exe on any Windows computer.
- D. mgmt_cli (API) or WebUI on Security Gateway and SmartConsole on the Security Management Server.
Answer: A
Explanation:
In order to modify Security Policies, the administrator can use SmartConsole or mgmt_cli (API) on any computer where SmartConsole is installed. SmartConsole is a graphical tool that allows the administrator to create, edit, and manage security policies using a web browser. mgmt_cli (API) is a command-line tool that allows the administrator to perform the same tasks using commands and scripts. Both tools can connect to the Security Management Server remotely from any computer that has SmartConsole installed.[SmartConsole Overview], [mgmt_cli (API)]
NEW QUESTION # 198
How are the backups stored in Check Point appliances?
- A. Saved as*tgz under /var/CPbackup
- B. Saved as*tar under /var/CPbackup
- C. Saved as*.tar under /var/log/CPbackup/backups
- D. Saved as*tgz under /var/log/CPbackup/backups
Answer: A
Explanation:
The backups are stored in Check Point appliances as *.tgz files under /var/CPbackup. This is the default location for backup files created by the backup command. Therefore, the correct answer is B. Saved as *.tgz under /var/CPbackup
NEW QUESTION # 199
What is the purpose of the CPCA process?
- A. Sending and receiving logs
- B. Communication between GUI clients and the SmartCenter server
- C. Generating and modifying certificates
- D. Monitoring the status of processes
Answer: C
Explanation:
The purpose of the CPCA process is generating and modifying certificates. CPCA stands for Check Point Certificate Authority and it is a process that runs on the Security Management Server or Log Server. It is responsible for creating and managing certificates for internal communication between Check Point components, such as SIC . [Check Point R81 Quantum Security Management Administration Guide], [Check Point R81 Quantum Security Gateway Guide]
NEW QUESTION # 200
Which option, when applied to a rule, allows all encrypted and non-VPN traffic that matches the rule?
- A. All Connections (Clear or Encrypted)
- B. Accept all encrypted traffic
- C. All Site-to-Site VPN Communities
- D. Specific VPN Communities
Answer: B
Explanation:
The option that allows all encrypted and non-VPN traffic that matches the rule is Accept all encrypted traffic.This option enables you to allow traffic to any destination that is encrypted, regardless of whether it is part of a VPN community or not2. Therefore, the correct answer is B.Accept all encrypted traffic.
NEW QUESTION # 201
Which type of Check Point license is tied to the IP address of a specific Security Gateway and cannot be transferred to a gateway that has a different IP address?
- A. Central
- B. Corporate
- C. Formal
- D. Local
Answer: D
Explanation:
Check Point licenses are divided into two types: central and local. Central licenses are managed by a Security Management Server and can be attached to any Security Gateway managed by that server. Local licenses are tied to the IP address of a specific Security Gateway and cannot be transferred to a gateway that has a different IP address. Formal and corporate are not types of Check Point licenses. [Check Point R81 Licensing and Contract Administration Guide]
NEW QUESTION # 202
Which Check Point software blade provides Application Security and identity control?
- A. Identity Awareness
- B. URL Filtering
- C. Application Control
- D. Data Loss Prevention
Answer: C
Explanation:
The Check Point software blade that provides Application Security and identity control is Application Control3.Application Control enables network administrators to identify, allow, block, or limit usage of thousands of applications and millions of websites3. Therefore, the correct answer is D.Application Control
NEW QUESTION # 203
Check Point ClusterXL Active/Active deployment is used when:
- A. There is Load Sharing solution set up
- B. There is High Availability solution set up
- C. Only when there is Multicast solution set up
- D. Only when there is Unicast solution set up
Answer: A
Explanation:
Check Point ClusterXL Active/Active deployment is used when there is Load Sharing solution set up.Load Sharing enables multiple Security Gateways to share traffic and provide high availability12. Check Point R81,Check Point R81 ClusterXL Administration Guide
NEW QUESTION # 204
Which of the following Windows Security Events will NOT map a username to an IP address in Identity Awareness?
- A. Kerberos Ticket Requested
- B. Kerberos Ticket Timed Out
- C. Kerberos Ticket Renewed
- D. Account Logon
Answer: B
Explanation:
The Windows Security Event that will NOT map a username to an IP address in Identity Awareness isKerberos Ticket Timed Out. This event occurs when a Kerberos ticket expires and is not renewed, which means that the user is no longer active on the network. Identity Awareness does not use this event to map a username to an IP address, as it does not indicate a valid user session. The other events are used by Identity Awareness to map a username to an IP address, as they indicate a successful user authentication or activity on the network.
NEW QUESTION # 205
Fill in the blank: When tunnel test packets no longer invoke a response, SmartView Monitor displays _____________ for the given VPN tunnel.
- A. Down
- B. Inactive
- C. Failed
- D. No Response
Answer: A
Explanation:
When tunnel test packets no longer invoke a response, SmartView Monitor displaysDownfor the given VPN tunnel1. This means that the VPN tunnel is not operational and there is no IKE or IPsec traffic passing through it. No Response, Inactive, and Failed are not valid statuses for VPN tunnels in SmartView Monitor. Smart View Monitor displays status for all S2S VPN tunnels - Phase1 UP
NEW QUESTION # 206
Which one of the following is a way that the objects can be manipulated using the new API integration in R80 Management?
- A. Microsoft Publisher
- B. Microsoft Word
- C. JSON
- D. RC4 Encryption
Answer: C
Explanation:
The way that the objects can be manipulated using the new API integration in R80 Management is JSON. JSON (JavaScript Object Notation) is a lightweight data-interchange format that is easy for humans and machines to read and write. The R80 Management API uses JSON as the primary data format for requests and responses. Therefore, the correct answer is B. JSON.
NEW QUESTION # 207
The purpose of the Communication Initialization process is to establish a trust between the Security Management Server and the Check Point gateways. Which statement best describes this Secure Internal Communication (SIC)?
- A. Secure Internal Communications authenticates the security gateway to the SMS before http communications are allowed.
- B. After successful initialization, the gateway can communicate with any Check Point node that possesses a SIC certificate signed by the same IC
- C. New firewalls can easily establish the trust by using the expert password defined on the SMS and the SMS IP address.
- D. A SIC certificate is automatically generated on the gateway because the gateway hosts a subordinate CA to the SMS ICA.
Answer: B
Explanation:
The statement that best describes Secure Internal Communication (SIC) is: After successful initialization, the gateway can communicate with any Check Point node that possesses a SIC certificate signed by the same ICA.SIC is a mechanism that ensures secure communication between Check Point components by using certificates that are issued by an Internal Certificate Authority (ICA)3. The other statements are not accurate descriptions of SIC.
NEW QUESTION # 208
To increase security, the administrator has modified the Core protection 'Host Port Scan' from 'Medium' to 'High' Predefined Sensitivity. Which Policy should the administrator install after Publishing the changes?
- A. The Threat Prevention Policy.
- B. The Access Control & HTTPS Inspection Policy.
- C. The Access Control Policy.
- D. The Access Control and Threat Prevention Policies.
Answer: A
Explanation:
To increase security, the administrator has modified the Core protection 'Host Port Scan' from 'Medium' to 'High' Predefined Sensitivity.The administrator should install theThreat Prevention Policyafter Publishing the changes3.The Threat Prevention Policy defines how the Security Gateway inspects and protects against threats such as port scans, bot attacks, and zero-day exploits4. Check Point R81 Firewall Administration Guide,Check Point R81 Threat Prevention Administration Guide
NEW QUESTION # 209
The SmartEvent R80 Web application for real-time event monitoring is called:
- A. SmartEventWeb
- B. SmartView Monitor
- C. SmartView
- D. There is no Web application for SmartEvent
Answer: C
Explanation:
SmartView is the web application for real-time event monitoring in SmartEvent R80 and above.It provides a unified view of security events across the network and allows for quick investigation and response34. SmartEvent R80.40 Administration Guide,SmartView
NEW QUESTION # 210
Full synchronization between cluster members is handled by Firewall Kernel. Which port is used for this?
- A. UDP port 256
- B. TCP port 265
- C. TCP port 256
- D. UDP port 265
Answer: B
Explanation:
The port used for full synchronization between cluster members is TCP port 2654.This port is used by the Firewall Kernel to send and receive synchronization data, such as connection tables, NAT tables, and VPN keys4.UDP port 8116 is used by the Cluster Control Protocol (CCP) for internal communications between cluster members4. How does the Cluster Control Protocol function in working and failure scenarios for gateway clusters?
NEW QUESTION # 211
In the Check Point Security Management Architecture, which component(s) can store logs?
- A. SmartConsole
- B. Security Management Server and Security Gateway
- C. SmartConsole and Security Management Server
- D. Security Management Server
Answer: B
Explanation:
The Security Management Server and the Security Gateway are the components that can store logs in the Check Point Security Management Architecture. The Security Management Server stores logs in a database and can also forward them to external log servers. The Security Gateway can store logs locally in a buffer or a local log file, and can also send them to the Security Management Server or a log server.
NEW QUESTION # 212
Which of the following situations would not require a new license to be generated and installed?
- A. The IP address of the Security Management or Security Gateway has changed.
- B. The license is upgraded.
- C. The Security Gateway is upgraded.
- D. The existing license expires.
Answer: C
Explanation:
Upgrading the Security Gateway does not require a new license to be generated and installed. The license is tied to the IP address or hostname of the Security Gateway, not the software version.However, if the IP address or hostname changes, the existing license expires, or the license is upgraded, a new license must be generated and installed12Check Point R81,Managing and Installing license via SmartUpdate
NEW QUESTION # 213
Which application is used for the central management and deployment of licenses and packages?
- A. Deployment Agent
- B. SmartUpdate
- C. SmartProvisioning
- D. SmartLicense
Answer: B
Explanation:
SmartUpdate is the application that is used for the central management and deployment of licenses and packages.SmartUpdate allows administrators to manage licenses, software updates, and hotfixes for multiple Security Gateways and cluster members from one central location2. SmartProvisioning is an application that enables centralized management of network devices. SmartLicense is a feature that simplifies license management by using a cloud-based portal.Deployment Agent is a component that enables automatic deployment of software packages3.
NEW QUESTION # 214
Which of the following is NOT an advantage to using multiple LDAP servers?
- A. You achieve compartmentalization by allowing a large number of users to be distributed across several servers
- B. You gain High Availability by replicating the same information on several servers
- C. Information on a user is hidden, yet distributed across several servers.
- D. You achieve a faster access time by placing LDAP servers containing the database at remote sites
Answer: C
Explanation:
The statement that information on a user is hidden, yet distributed across several servers is not an advantage to using multiple LDAP servers. LDAP (Lightweight Directory Access Protocol) is a protocol that allows access to a centralized directory service that stores information about users, groups, devices, etc. Using multiple LDAP servers can provide advantages such as faster access time, compartmentalization, and high availability, but not hiding information. Information on a user is not hidden by using multiple LDAP servers, but rather replicated or partitioned across them. Replication means that the same information is copied to all LDAP servers, while partitioning means that different information is stored on different LDAP servers. Both methods aim to improve performance and reliability, not security or privacy.[LDAP Integration], [LDAP]
NEW QUESTION # 215
Which type of Check Point license ties the package license to the IP address of the Security Management Server?
- A. Central
- B. Local
- C. Corporate
- D. Formal
Answer: A
Explanation:
The type of Check Point license that ties the package license to the IP address of the Security Management Server is Central license. A Central license is a license that is installed on the Security Management Server and applies to all the Security Gateways that are managed by it. The Central license is based on the IP address of the Security Management Server and cannot be transferred to another Security Management Server with a different IP address.[Check Point R81 Licensing Guide], [Managing and Installing license via SmartUpdate]
NEW QUESTION # 216
......
Resources From:
- 2026 Latest Dumpexams 156-215.82 Exam Dumps (PDF & Exam Engine) Free Share: https://www.dumpexams.com/156-215.82-real-answers.html
- 2026 Latest Dumpexams 156-215.82 PDF and 156-215.82 Exam Dumps Free Share: https://drive.google.com/open?id=19KyVzIjMMEC4XGnNnOfKetW3GrA-MOo-
Free Resources from Dumpexams, We Devoted to Helping You 100% Pass All Exams!