[Jun 29, 2026] NS0-528 Practice Exam Dumps - 99% Marks In Network Appliance Exam
Updated Verified NS0-528 Q&As - Pass Guarantee or Full Refund
NEW QUESTION # 132
You have a requirement to keep multiple yearly Snapshot copies on your SnapMirror destination volume. However, you do not want to have the Snapshot copies locked on your source volume because you do not have the required capacity.
Where do you set the schedule option to create the required Snapshot copies?
- A. primary SnapMirror policy
- B. secondary Snapshot policy
- C. secondary SnapMirror policy
- D. primary Snapshot policy
Answer: B
Explanation:
To retain multiple yearly Snapshot copies only on the SnapMirror destination, you must apply a Snapshot policy on the secondary volume. This avoids consuming space on the source volume, as these Snapshots are created and retained independently on the destination.
NEW QUESTION # 133
You must back up and replicate a Microsoft SQL server using SnapProtect in your clustered Data ONTAP environment.
Which three components must be correctly installed and configured? (Choose three.)
- A. On Command Workflow Automation
- B. SnapProtect v10
- C. On Command Unified Manager 6.0
- D. SnapDrive for Windows
- E. SnapProtectiDataAgent
Answer: A,C,E
NEW QUESTION # 134
A customer wants to replicate between their two NetApp ONTAP clusters but is concerned that replication traffic might slow down normal data traffic. They still have two unused network ports on every node. You recommend using dedicated ports for the Intercluster LIFs, and you are tasked with creating the Intercluster LIFs so that they are on dedicated ports at all times.
Which command must you use before creating InterCluster LIFs?
- A. network ipspace create -ipspace
- B. system services firewall policy create
- C. network interface failover-groups create
- D. network interface service-policy create
Answer: D
Explanation:
To ensure Intercluster LIFs are bound to dedicated ports and used only for replication traffic, you must first create a service policy that defines the LIF's role (e.g., intercluster). The network interface service-policy create command allows you to specify that the LIF is intended strictly for intercluster services, ensuring it's isolated from data traffic.
NEW QUESTION # 135
Which NetApp technology helps to protect against ransomware attacks?
- A. SyncMirror
- B. NetApp Aggregate Encryption
- C. NetApp Volume Encryption
- D. SnapLock
Answer: D
NEW QUESTION # 136
Your customer is running NAS & SAN workloads on an old two node ONTAP Cluster, which reached end of support. As their business is growing, they need a new solution which can provide continuous availability and an automatic switchover for all of his workloads. They already have two data centres that are about 400km apart.
Which solution meets this requirement?
- A. SnapMirror active sync
- B. MetroCluster IP
- C. SnapMirror SVM replication
- D. MetroCluster FC
Answer: B
Explanation:
MetroCluster IP is the ideal solution for continuous availability and automatic switchover of both NAS and SAN workloads across geographically separated data centers (up to 700 km apart). It provides synchronous replication with automatic disaster recovery capabilities, making it the best fit for this scenario.
NEW QUESTION # 137
Due to legal compliance requirements, a financial institution needs to store and commit files to a non-erasable, non-rewritable state either forever or for a designated retention period.
In this scenario, which ONTAP feature will satisfy these requirements?
- A. SnapDiff
- B. SnapLock
- C. Snapshot
- D. FlexClone
Answer: B
NEW QUESTION # 138
You must manually upgrade your company's 8-node cluster from ONTAP 9.5 to ONTAP 9.7. Due to the sensitivity of the data that is being stored on the cluster, it is company policy to perform these upgrades one node at a time.
What are two steps that you must perform to accomplish this task? (Choose two.)
- A. Terminate active SMB connections.
- B. Change disk ownership.
- C. Terminate active NFS connections.
- D. Move Epsilon to maintain cluster quorum.
Answer: A,D
NEW QUESTION # 139
Which three protocols are supported by SnapMirror Synchronous? (Choose three.)
- A. SMB3
- B. FC
- C. NFSv4.1
- D. NFSv3
- E. iSCSI
Answer: B,D,E
NEW QUESTION # 140
What is a backup schedule in NetApp data protection software?
- A. A method for compressing data to reduce storage space
- B. A set of rules for determining when backups occur
- C. A method for encrypting data to protect it from unauthorized access
- D. A method for optimizing data access
Answer: B
NEW QUESTION # 141
A ransomware attack has compromised all files on a CIFS share. The volume had a retention policy of five daily Snapshot copies, but unfortunately, no Snapshot copies were available. It was confirmed that the cybercriminal accessed only the share and did not gain access to the NetApp ONTAP cluster.
What command should be executed to prevent the quick restore strategy from being compromised?
- A. volume modify -snapdir-access false
- B. volume autosize -autogrow disable
- C. volume snapshot -autodelete disabled
- D. security multi-admin-verify modify -enabled true
Answer: A
Explanation:
Setting snapdir-access to false prevents users accessing the CIFS/NFS share from viewing or deleting Snapshot copies via the .snapshot directory. This secures the Snapshot restore mechanism from being exposed or tampered with in case of another attack through file shares.
NEW QUESTION # 142
You are the administrator of a large NAS environment that includes multiple NetApp and non-NetApp onsite storage systems, as well as multiple cloud storage solutions. One of your responsibilities is to replicate data between these systems.
Which NetApp tool enables you to replicate data between these autonomous systems?
- A. BlueXP tiering
- B. BlueXP disaster recovery
- C. BlueXP backup and recovery
- D. BlueXP copy and sync
Answer: D
Explanation:
BlueXP copy and sync enables efficient data replication and synchronization between NetApp and non-NetApp storage systems, both on-premises and in the cloud. It's specifically designed for cross-platform and cross-environment data movement, making it ideal for this scenario.
NEW QUESTION # 143
A company has a 4-node FAS9000 fabric MetroCluster cluster separated by 101 km. Site A has an unmirrored HDD aggregate. An FC-VI card fails in one of the nodes in site A and a switchover occurs.
Which statement is correct in this scenario?
- A. The aggregateis accessible using Site A's surviving node.
- B. The distance is not supported.
- C. Only SSD aggregates are accessible.
- D. The aggregate is accessible using Site B's cluster.
Answer: D
NEW QUESTION # 144
Exhibit:
You have a volume that was configured a year ago using the default Snapshot policy that is shown in the exhibit. You need to increase the number of weekly maximum Snapshot copies to retain eight copies.
Which additional action is needed to have eight weekly Snapshot copies in this volume after modifying the schedule?
- A. Modify the Snapshot reserve.
- B. Reapply the default policy to the volume
- C. Delete six weekly Snapshot copies
- D. Wait six weeks for Snapshot retention.
Answer: B
NEW QUESTION # 145
You experience a node outage as a result of a component failure in a high-availability (HA) pair. You replace the failed component and get thenode booted up again, but are unable to perform the giveback operation.
The onscreen error is:
"Connected to partner, Takeover is not possible: Storage failover mailbox disk state is invalid, Local node has encountered errors while reading the storage failover partner's mailbox disks. Local node missing partner disks" What are two ways to solve this problem? (Choose two.)
- A. Correct the failover group configuration.
- B. Destroy the root aggregate.
- C. Destroy the mailboxes on both nodes.
- D. Correct the shelf cabling errors.
Answer: A,D
NEW QUESTION # 146
You are working with a customer with two NetApp clusters, one AFF A800 cluster and one AFF A900 cluster, in different locations. The customer has a SAN application that spans multiple volumes, which needs protection in the event of a disaster with automatic failover. The customer requires zero RPO and near-zero RTO for this application.
Which two steps should you take to implement this solution? (Choose two.)
- A. Implement a MetroCluster IP configuration.
- B. Set up and initialize a SnapMirror Asynchronous relationship.
- C. Set up and initialize a SnapMirror active sync relationship.
- D. Install NetApp ONTAP Mediator service at a third site.
Answer: C,D
Explanation:
To achieve zero RPO and near-zero RTO for SAN applications across two NetApp clusters in different locations, you must:
* Use SnapMirror active sync, which provides active-active synchronous replication.
* Deploy the ONTAP Mediator at a third site to monitor and coordinate automatic failover during disaster events.
NEW QUESTION # 147
You are tasked with planning a backup solution for a VMware environment running Windows VM. There is a requirement that production datastores must have ten days of local backups and a daily replication to a DR cluster site. The development datastores require only 7 days of local backups. There is also a requirement for a tool for the VMware administrators that enables them to monitor backups and perform restores.
What procedure can you use to meet the requirements?
- A. In NetApp ONTAP System Manager, create Snapshot policies for production and development datastore volumes, and create a protection relationship for each production volume.
- B. Install the NetApp SnapCenter Server from the GUI, create policies for production and development, and create resource groups for the production and development datastores.
- C. Deploy the NetApp SnapCenter Plug-In for VMware vSphere from vCenter, create policies for production and development, and create resource groups for the production and development datastores.
- D. Deploy the NetApp SnapCenter Plug-In for Microsoft Windows from vCenter, create policies for production and development, and create resource groups for the production and development datastores.
Answer: C
Explanation:
To meet the requirements of:
* Local backups for production (10 days) and development (7 days),
* Daily replication to a DR site for production, and
* Providing VMware administrators with backup and restore control,
you should use the SnapCenter Plug-In for VMware vSphere, which integrates directly with vCenter. It supports backup, restore, and monitoring of VMs and datastores, and allows policy and resource group configuration aligned with the specified retention and replication needs.
NEW QUESTION # 148
An administrator is deploying NetApp BlueXP backup and recovery for VMs to protect both Windows and Linux systems. The site has two instances of VMware Cloud on AWS that need to be backed up.
How will this goal be accomplished? (Choose two.)
- A. Deploy one instance of BlueXP backup and recovery on a single Linux VM.
- B. Deploy two instances of BlueXP backup and recovery on separate Linux VMs.
- C. Pair both instances of VMware Cloud on AWS to a single instance of BlueXP backup and recovery.
- D. Pair each instance of VMware Cloud on AWS with a unique instance of BlueXP backup and recovery.
Answer: B,C
Explanation:
BlueXP backup and recovery supports multiple VMware Cloud on AWS instances with a single BlueXP backup and recovery deployment, as long as proper pairing is done. Alternatively, separate deployments can also be used if desired, each on its own Linux VM. This provides deployment flexibility depending on isolation, scalability, or administrative needs.
NEW QUESTION # 149
Which two statements are correct about MetroCluster IP requirements for intercluster LIFs? (Choose two.)
- A. A dedicated network port is required.
- B. Either an IPv6 address or IPv4 address is required.
- C. At least one interface per node is required.
- D. Jumbo frames are required.
Answer: A,B
NEW QUESTION # 150
Your customer is required to store backups of home directories that are hosted on an on-premises ONTAP 9.7 system in the cloud.
In this scenario, which NetApp solution satisfies this requirement?
- A. FabricPool with an Amazon S3 cloud tier
- B. SnapMirror with a Cloud Volumes Service destination
- C. FabricPool with a StorageGRID cloud tier
- D. SnapMirror with a Cloud Volumes ONTAP destination
Answer: D
NEW QUESTION # 151
......
Network Appliance NS0-528 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
NS0-528 Real Valid Brain Dumps With 278 Questions: https://www.dumpexams.com/NS0-528-real-answers.html
NS0-528 Certification with Actual Questions: https://drive.google.com/open?id=1zaucPar-AL7vota5duFJ053ab_vvwWSN