Valid FCP_FSM_AN-7.2 Exam Q&A PDF FCP_FSM_AN-7.2 Dump is Ready (Updated 44 Questions)
Exam Questions and Answers for FCP_FSM_AN-7.2 Study Guide
NEW QUESTION # 25
Refer to the exhibit.
If you group the events by Reporting Device, Reporting IP, and Application Category, how many results will FortiSIEM display?
- A. Five
- B. Two
- C. Six
- D. Four
- E. One
Answer: A
Explanation:
Grouping by Reporting Device, Reporting IP, and Application Category yields five unique tuples: (FW01, 10.1.1.1, DB), (FW02, 10.1.1.2, WebApp), (FW01, 10.1.1.1, SSH), (FW03, 10.1.1.3, DB), and (FW04, 10.1.1.4, SSH).
NEW QUESTION # 26
Refer to the exhibit.
Which section contains the subpattern configuration that determines how many matching events are needed to trigger the rule?
- A. Actions
- B. Group By
- C. Aggregate
- D. Filters
Answer: C
Explanation:
The Aggregate section contains the condition COUNT(Matched Events) >= 1, which defines how many events must match the filter criteria for the rule to trigger. This is the subpattern configuration that determines the event threshold.
NEW QUESTION # 27
Refer to the exhibit.
If you group the events by User, Source IP, and Count attributes, how many results will FortiSIEM display?
- A. Three
- B. Six
- C. Two
- D. Five
- E. Four
Answer: B
Explanation:
Grouping by User, Source IP, and Count means that each unique combination of those three attributes will be treated as a separate result. In the table, all six rows have distinct combinations of User, Source IP, and Count - so FortiSIEM will display 6 results.
NEW QUESTION # 28
Refer to the exhibit.
As shown in the exhibit, why are some of the fields highlighted in red?
- A. The attribute COUNT(Matched Events) is an invalid expression.
- B. No RAW Event Log attribute information is available.
- C. The Event Receive Time attribute is not available for logs.
- D. Unique values cannot be grouped B.
Answer: D
Explanation:
The fields are highlighted in red because unique values such as Event Receive Time and Raw Event Log cannot be used in group-by operations. Grouping requires aggregatable or consistent values across events, while these fields are unique to each event, making them incompatible for grouping.
NEW QUESTION # 29
Refer to the exhibit. What does the Define Condition time field determine for this rule?
- A. The time period over which the rule evaluates events.
- B. How often the rule will perform remediation.
- C. How often the rule will evaluate the subpattern(s).
- D. The time of day the rule will trigger.
Answer: A
NEW QUESTION # 30
Refer to the exhibit.
An analyst is trying to identify an issue using an expression based on the Expression Builder settings shown in the exhibit; however, the error message shown in the exhibit indicates that the expression is invalid.
What is the correct syntax to create an expression that generates a total count of matched events?
- A. COUNT(Matched Events)
- B. Matched Events (COUNT)
- C. (COUNT) Matched Events
- D. Matched Events COUNT()
Answer: A
Explanation:
The correct syntax is COUNT(Matched Events) - with proper capitalization and spacing - to generate a total count of matched events. The error in the exhibit likely stems from a formatting issue (e.g., lowercase count() or incorrect spacing), not the logical structure of the expression.
NEW QUESTION # 31
What can you use to send data to FortiSIEM for user and entity behavior analytics (UEBA)?
- A. FortiSIEM agent
- B. SSH
- C. SNMP
- D. FortiSIEM worker
Answer: A
Explanation:
The FortiSIEM agent can be used to send detailed endpoint data such as user activity and process behavior to FortiSIEM, which is essential for performing User and Entity Behavior Analytics (UEBA).
NEW QUESTION # 32
What feature defines when an incident is created by FortiSIEM?
- A. CMDB
- B. Analytics
- C. Cases
- D. Rules
Answer: D
NEW QUESTION # 33
Refer to the exhibit.
A FortiSIEM device is receiving syslog events from a FortiGate firewall. The FortiSIEM analyst is trying to search the raw event logs for the last two hours that contain the keyword "udp".
However, they are getting no results from the search, which they know should be available.
Based on the filter shown in the exhibit, why are there no search results?
- A. The keyword is case sensitive. Instead of typing udp in the Value field, the analyst should type UDP.
- B. The Time Range value should be set to Real-Time.
- C. The analyst selected = in the Operator column. That is the wrong operator.
- D. The analyst selected AND in the Next column. This is the wrong Boolean operator.
Answer: C
Explanation:
The operator is set to "=", which performs an exact match on the entire raw event log, not a substring search. To find logs that contain the keyword "udp", the analyst should use the CONTAIN operator instead. This will return all logs where "udp" appears anywhere in the raw log message.
NEW QUESTION # 34
Which analytics search can be used to apply a user and entity behavior analytics (UEBA) tag to an event for a failed login by the user JSmith?
- A. Username CONTAIN smit
- B. User = smith
- C. User IS jsmith
- D. Username NOT END WITH jsmith
Answer: C
Explanation:
The correct syntax to match an exact username in FortiSIEM analytics search is User IS jsmith.
This ensures that the UEBA tag is applied only when the event is specifically tied to the user
"jsmith", which is required for accurate behavioral analytics.
NEW QUESTION # 35
What must you configure to apply ZTNA tags from FortiSIEM to devices in FortiClient EMS?
- A. Syslog connection to FortiGate firewalls from FortiSIEM
- B. API connection from FortiClient EMS to FortiSIEM
- C. API connection from FortiSIEM to FortiClient EMS
- D. Syslog connection to FortiSIEM from FortiGate firewalls
Answer: C
NEW QUESTION # 36
Which statement about thresholds is true?
- A. FortiSIEM uses only global thresholds for performance metrics.
- B. FortiSIEM uses fixed, hardcoded global and device thresholds for all performance metrics.
- C. FortiSIEM uses only device thresholds for security metrics.
- D. FortiSIEM uses global and per device thresholds for performance metrics.
Answer: D
Explanation:
FortiSIEM evaluates performance metrics against both global thresholds, which apply system-wide, and per-device thresholds, which can be customized for individual devices. This dual approach allows flexibility in monitoring while ensuring consistent baseline alerting.
NEW QUESTION # 37
Which analytics search can be used to apply a user and entity behavior analytics (UEBA) tag to an event for a failed login by the user JSmith?
- A. Username CONTAIN smit
- B. User = smith
- C. User IS jsmith
- D. Username NOT END WITH jsmith
Answer: C
Explanation:
The correct syntax to match an exact username in FortiSIEM analytics search is User IS jsmith. This ensures that the UEBA tag is applied only when the event is specifically tied to the user "jsmith", which is required for accurate behavioral analytics.
NEW QUESTION # 38
Refer to the exhibit.
An analyst is troubleshooting the rule shown in the exhibit. It is not generating any incidents, but the filter parameters are generating events on the Analytics tab.
What is wrong with the rule conditions?
- A. The Group By attributes restricts which events are counted.
- B. The Destination Host Name value is not fully qualified.
- C. The Aggregate attribute is too restrictive.
- D. The Event Type refers to a CMDB lookup and should be an Event lookup.
Answer: A
Explanation:
The Group By attributes - Destination IP and User - cause the aggregation (COUNT(Source IP) >= 2) to apply within each unique combination of those groupings. This restricts the count calculation and can prevent the rule from triggering incidents, even if matching events exist in the Analytics tab.
NEW QUESTION # 39
What are two required components of a rule? (Choose two.)
- A. Detection Technology
- B. Clear policy
- C. Exception policy
- D. Subpattern
Answer: A,D
Explanation:
A Subpattern defines the specific conditions or event patterns the rule is designed to detect, and the Detection Technology specifies the type of detection logic (e.g., real-time, historical). Both are essential for a rule to function in FortiSIEM.
NEW QUESTION # 40
Refer to the exhibit.
According to the automation policy configuration shown in the exhibit, what happens if an associated rule triggers?
- A. FortiSIEM sends an email, because that is first on the list.
- B. FortiSIEM runs the remediation script, because that takes precedence over all other options.
- C. FortiSIEM performs all selected actions.
- D. FortiSIEM fails to the integration policy, because no policy is defined.
Answer: C
Explanation:
When an associated rule triggers, FortiSIEM performs all selected actions in the automation policy. In this case, it will send an email/SMS/webhook, run the remediation script, invoke the integration policy (even if none is currently defined), and create a case. All checked actions are executed.
NEW QUESTION # 41
How does FortiSIEM update the incident table if a performance rule triggers repeatedly?
- A. FortiSIEM changes the incident status to Repeated, and updates the Last Seen timestamp.
- B. FortiSIEM generates a new incident each time the rule triggers, and updates the First Seen and Last Seen timestamps.
- C. FortiSIEM updates the Incident Count value and Last Seen timestamp.
- D. FortiSIEM generates a new incident based on the Rule Frequency value, and updates the First Seen and Last Seen timestamps.
Answer: C
Explanation:
When a performance rule triggers repeatedly, FortiSIEM updates the existing incident by incrementing the Incident Count and refreshing the Last Seen timestamp. This avoids flooding the incident table with duplicates while still tracking repeated occurrences.
NEW QUESTION # 42
Refer to the exhibit.
What happens when an analyst clears an incident generated by a rule containing the automation policy shown in the exhibit?
- A. No notification is sent.
- B. The remediation script is run.
- C. An email is sent to the SOC manager.
- D. A notification is sent to the SOC manager dashboard.
Answer: A
Explanation:
The automation policy has the option "Do not notify when an incident is cleared manually" enabled. Therefore, when an analyst manually clears an incident, no notification or automation action is triggered.
NEW QUESTION # 43
Refer to the exhibit.
Which value would you expect the FortiSIEM parser to use to populate the Application Name field?
- A. SSL
- B. Network.Service
- C. wan1
- D. applist
Answer: A
Explanation:
The Application Name field in FortiSIEM is typically populated using the value of the app field in the raw log. In this event, app="SSL", so "SSL" is the expected application name parsed by FortiSIEM.
NEW QUESTION # 44
Refer to the exhibit. If you group the events by Reporting Device, Reporting IP, and Application Category, how many results will FortiSIEM display?
- A. Five
- B. Two
- C. Six
- D. Four
- E. One
Answer: A
Explanation:
Grouping by Reporting Device, Reporting IP, and Application Category yields five unique tuples:
(FW01, 10.1.1.1, DB), (FW02, 10.1.1.2, WebApp), (FW01, 10.1.1.1, SSH), (FW03, 10.1.1.3, DB), and (FW04, 10.1.1.4, SSH).
NEW QUESTION # 45
......
Fortinet FCP_FSM_AN-7.2 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
Certification dumps - Fortinet Certified Professional Security Operations FCP_FSM_AN-7.2 guides - 100% valid: https://www.dumpexams.com/FCP_FSM_AN-7.2-real-answers.html
100% Pass Your FCP_FSM_AN-7.2 FCP - FortiSIEM 7.2 Analyst at First Attempt with Dumpexams: https://drive.google.com/open?id=1_h1f0WUkLeNPzw_144wnShHPWn9bRQRG