Associate-Cloud-Engineer Practice Exam and Study Guides - Verified By Dumpexams Updated 245 Questions
2021 Updated Verified Pass Associate-Cloud-Engineer Study Guides & Best Courses
Books and Additional Resources
There are various books on Amazon that can help you prepare for the Google Associate Cloud Engineer test such as:
- Google Cloud Certified Associate Cloud Engineer Certification Guide 1: Learn with challenge labs, assessment tests and practice exams to build innovations and real-life experiences by A. B. Lawal. This study guide is one of the most up-to-date books that can get you from the current level you are at, to passing the Google Associate Cloud Engineer certification exam. All of this is due to the fact that this book has additional tasks such as challenge labs, assessment tests bank, and flashcard banks to raise your self-assurance. Moreover, it also offers practice exam questions along with their correct answers and remarks as well as downloadable screenshots and summaries for quick exam revision to fully prepare you.
- Google Cloud: GCP: Google Cloud Platform: Associate Cloud Engineer Practice Test 2021 by Anthony Stewart. This book is an A to Z guide that efficiently teaches the skills that are required by the Associate Cloud Engineer certification. Thus, it covers topics such as management of enterprise solutions, deploying applications, and monitoring operations. At the same time, this is a good book for beginners as it does not require students to already have previous experience, going in. It also aids potential test-takers to demonstrate their skills through a certification exam that requires the ability to use the command-line and the GCP console to perform many general platform-based tasks.
- One of the most recommended books is the Official Google Cloud Certified Associate Cloud Engineer Study Guide (1st Edition) by Dan Sullivan. This study guide presents everything you need to know to pass this crucial exam. You can master the knowledge required to obtain the Google Cloud Engineer certification and demonstrate your skillset needed to operate and deploy services, infrastructure, and networks in Google Cloud. The book prepares you to step-by-step studies with a pre-book official test to evaluate what you know before you start, exam objectives, and review questions in each chapter. Moreover, you will access the online learning environment, which will help you sharpen your knowledge with practice tests.
- Google Certified Associate Cloud Engineer Technology workbook by IP specialist. This book will help you enhance your ability to understand monitoring operations, deploying applications, and managing enterprise solutions. So, you will gain in-depth knowledge in using the GCP Console and the CLI to perform common platform-based tasks for the maintenance of one or more deployed solutions that leverage services on Google Cloud.
- Google Cloud Certified Associate Cloud Engineer All-in-One Exam Guide 1st Edition by Jack Hyman. This book is written by a cloud computing expert and educator in this field. By ordering this edition from Amazon, you will get an exam guide based on proven experience and containing unique techniques that supply and reinforce practical skills through precise practice questions and detailed explanations of answers. Thus, you can gain confidence in planning, setting up, and configuring GCP; ensuring effective operation, and administering access and security, which helps you to pass the Associate Cloud Engineer exam on your first attempt.
NEW QUESTION 24
You are working a System Administrator and have been asked to make sure that all images are patched up to date and developers are not allowed to use old images which are not up to date as per PCI compliance. How would you achieve this?
- A. None of the above.
- B. Mark image as deprecated to prevent users from using the old image.
- C. Mark image as obsolete to prevent users from using the old image.
- D. Drop a mail to all the developers regarding which image to use whenever you patch images.
Answer: C
NEW QUESTION 25
While working on a project, an application administrator has been given the responsibility of managing all resources. He wants to delegate the responsibility of managing the existing service accounts to another administrator. He will also be responsible to manage the other service accounts that will be created. Which of the following is the best way to delegate the privileges required to manage all the service accounts?
- A. Granting iam.serviceAccountUser to the administrator at the project level
- B. Granting iam.serviceAccountUser to the administrator at the service account level
- C. Granting iam.serviceProjectAccountUser to the administrator at the service account level
- D. Granting iam.serviceProjectAccountUser to the administrator at the project level
Answer: A
NEW QUESTION 26
You have an application that looks for its licensing server on the IP 10.0.3.21. You need to deploy the licensing server on Compute Engine. You do not want to change the configuration of the application and want the application to be able to reach the licensing server. What should you do?
- A. Start the licensing server with an automatic ephemeral IP address, and then promote it to a static internal IP address.
- B. Reserve the IP 10.0.3.21 as a static internal IP address using gcloud and assign it to the licensing server.
- C. Reserve the IP 10.0.3.21 as a static public IP address using gcloud and assign it to the licensing server.
- D. Use the IP 10.0.3.21 as a custom ephemeral IP address and assign it to the licensing server.
Answer: B
NEW QUESTION 27
You need to run an important query in BigQuery but expect it to return a lot of records. You want to find out how much it will cost to run the query. You are using on-demand pricing. What should you do?
- A. Use the command line to run a dry run query to estimate the number of bytes returned. Then convert that bytes estimate to dollars using the Pricing Calculator.
- B. Use the command line to run a dry run query to estimate the number of bytes read. Then convert that bytes estimate to dollars using the Pricing Calculator.
- C. Run a select count (*) to get an idea of how many records your query will look through. Then convert that number of rows to dollars using the Pricing Calculator.
- D. Arrange to switch to Flat-Rate pricing for this query, then move back to on-demand.
Answer: B
NEW QUESTION 28
You're running an n-tier application on Compute Engine with an Apache web server serving up web requests. You want to consolidate all of your logging into Stackdriver. What's the best approach to get the Apache logs into Stackdriver?
- A. Create a log sink and export it to Stackdriver.
- B. Stackdriver logs application data from all instances by default.
- C. Enable Stackdriver monitoring when creating the instance.
- D. Install the Stackdriver monitoring and logging agents on the instance.
Answer: D
NEW QUESTION 29
You're attempting to deploy a new instance that uses the centos 7 family. You can't recall the exact name of the family. Which command could you use to determine the family names?
- A. gcloud compute images show-families
- B. gcloud compute images list
- C. gcloud compute instances list
- D. gcloud compute instances show-families
Answer: A,B
NEW QUESTION 30
You are working with a Cloud SQL MySQL database at your company. You need to retain a month-end copy of the database for three years for audit purposes. What should you do?
- A. Convert the automatic first-of-the-month backup to an export file.
Write the export file to a Coldline class Cloud Storage bucket. - B. Save the automatic first-of-the-month backup for three years.
Store the backup file in an Archive class Cloud Storage bucket. - C. Set up an export job for the first of the month.
Write the export file to an Archive class Cloud Storage bucket. - D. Set up an on-demand backup for the first of the month.
Write the backup to an Archive class Cloud Storage bucket.
Answer: B
NEW QUESTION 31
You are running multiple VPC-native Google Kubernetes Engine clusters in the same subnet. The IPs available for the nodes are exhausted, and you want to ensure that the clusters can grow in nodes when needed.
What should you do?
- A. Add an alias IP range to the subnet used by the GKE clusters.
- B. Expand the CIDR range of the relevant subnet for the cluster.
- C. Create a new subnet in the same region as the subnet being used.
- D. Create a new VPC, and set up VPC peering with the existing VPC.
Answer: D
Explanation:
Explanation
To create a VPC peering connection, first create a request to peer with another VPC.
NEW QUESTION 32
Which of the following IP address would you specify to define a CIDR range that will apply to all the destination addresses?
- A. 10.0.0.0/8
- B. 0.0.0.0/0
- C. 192.168.0.0/16
- D. 172.16.0.0/12
Answer: B
NEW QUESTION 33
You have a Compute Engine instance hosting an application used between 9 AM and 6 PM on weekdays. You want to back up this instance daily for disaster recovery purposes. You want to keep the backups for 30 days. You want the Google-recommended solution with the least management overhead and the least number of services. What should you do?
- A. 1. Create a bash script in the instance that copies the content of the disk to Cloud Storage.
2. Create a bash script in the instance that deletes data older than 30 days in the backup Cloud Storage bucket.
3. Configure the instance's crontab to execute these scripts daily at 1:00 AM. - B. 1. Update your instances' metadata to add the following value: snapshot-schedule: 0 1 * * *
2. Update your instances' metadata to add the following value: snapshot-retention: 30 - C. 1. In the Cloud Console, go to the Compute Engine Disks page and select your instance's disk.
2. In the Snapshot Schedule section, select Create Schedule and configure the following parameters:
- Schedule frequency: Daily
- Start time: 1:00 AM - 2:00 AM
- Autodelete snapshots after 30 days - D. 1. Create a Cloud Function that creates a snapshot of your instance's disk.
2. Create a Cloud Function that deletes snapshots that are older than 30 days.
3. Use Cloud Scheduler to trigger both Cloud Functions daily at 1:00 AM.
Answer: C
NEW QUESTION 34
Your company is moving from an on-premises environment to Google Cloud Platform (GCP). You have multiple development teams that use Cassandra environments as backend databases. They all need a development environment that is isolated from other Cassandra instances. You want to move to GCP quickly and with minimal support effort. What should you do?
- A. 1. Build a Cassandra Compute Engine instance and take a snapshot of it.
2. Upload the snapshot to Cloud Storage and make it accessible to your developers.
3. Build instructions to create a Compute Engine instance from the snapshot so that developers can do it themselves. - B. 1. Build an instruction guide to install Cassandra on GCP.
2. Make the instruction guide accessible to your developers. - C. 1. Advise your developers to go to Cloud Marketplace.
2. Ask the developers to launch a Cassandra image for their development work. - D. 1. Build a Cassandra Compute Engine instance and take a snapshot of it.
2. Use the snapshot to create instances for your developers.
Answer: C
NEW QUESTION 35
A company has many applications on Amazon EC2 instances running in Auto Scaling groups. Company policies require that data on the attached Amazon EBS volume must be retained.
Which actions will meet this requirement without impacting performance?
- A. Disable DeleteOnTermination for the Amazon EBS volumes.
- B. Enable Termination Protection on the Amazon EC2 instances.
- C. Change the auto scaling Health Check to point to a source on the root volume.
- D. Use Amazon EC2 user data to set up a synchronization job for root volume data.
Answer: A
Explanation:
Explanation/Reference: https://aws.amazon.com/ec2/faqs/#Spot_instances
NEW QUESTION 36
You need to provide a cost estimate for a Kubernetes cluster using the GCP pricing calculator for Kubernetes.
Your workload requires high IOPs, and you will also be using disk snapshots. You start by entering the number of nodes, average hours, and average days. What should you do next?
- A. Select Add GPUs. Fill in persistent disk storage and snapshot storage.
- B. Select Add GPUs. Add estimated cost for cluster management.
- C. Fill in local SSD. Add estimated cost for cluster management.
- D. Fill in local SSD. Fill in persistent disk storage and snapshot storage.
Answer: A
Explanation:
Explanation/Reference: https://cloud.google.com/products/calculator#tab=container
NEW QUESTION 37
You manage three Google Cloud projects with the Cloud Monitoring API enabled. You want to follow Google-recommended practices to visualize CPU and network metrics for all three projects together. What should you do?
- A. 1. Create a Cloud Monitoring Dashboard
2. Collect metrics and publish them into the Pub/Sub topics
3. Add CPU and network Charts (or each of (he three projects - B. 1 Create a Service Account and apply roles/viewer on the three projects
2. Collect metrics and publish them lo the Cloud Monitoring API
3. Add CPU and network Charts for each of the three projects. - C. 1. Create a Cloud Monitoring Dashboard.
2. Select the CPU and Network metrics from the three projects.
3. Add CPU and network Charts lot each of the three protects. - D. 1. Create a fourth Google Cloud project
2. Create a Cloud Workspace from the fourth project and add the other three projects
Answer: C
NEW QUESTION 38
You need to grant access for three users so that they can view and edit table data on a Cloud Spanner instance. What should you do?
- A. Run gcloud iam roles describe roles/spanner.databaseUser.
Add the users to the role. - B. Run gcloud iam roles describe roles/spanner.viewer - -project my-project.
Add the users to the role. - C. Run gcloud iam roles describe roles/spanner.viewer - -project my-project.
Add the users to a new group. Add the group to the role. - D. Run gcloud iam roles describe roles/spanner.databaseUser.
Add the users to a new group. Add the group to the role.
Answer: D
NEW QUESTION 39
You need to configure IAM access audit logging in BigQuery for external auditors. You want to follow Google-recommended practices. What should you do?
- A. Add the auditor user accounts to the 'logging.viewer' and 'bigQuery.dataViewer' predefined IAM roles.
- B. Add the auditors group to two new custom IAM roles.
- C. Add the auditors group to the 'logging.viewer' and 'bigQuery.dataViewer' predefined IAM roles.
- D. Add the auditor user accounts to two new custom IAM roles.
Answer: A
NEW QUESTION 40
You need to verify that a Google Cloud Platform service account was created at a particular time. What should you do?
- A. Filter the Activity log to view the Configuration category. Filter the Resource type to Service Account.
- B. Filter the Activity log to view the Data Access category. Filter the Resource type to Service Account.
- C. Filter the Activity log to view the Data Access category. Filter the Resource type to Google Project.
- D. Filter the Activity log to view the Configuration category. Filter the Resource type to Google Project.
Answer: C
NEW QUESTION 41
......
Ultimate Guide to the Associate-Cloud-Engineer - Latest Edition Available Now: https://www.dumpexams.com/Associate-Cloud-Engineer-real-answers.html
2021 Updated Verified Pass Associate-Cloud-Engineer Exam - Real Questions & Answers: https://drive.google.com/open?id=1RhsA6GI3lHQ8eULc1QGDYY6URaebCJ8h