DumpExams is an authorized company offering valid and latest dump exams & dumps VCE materials. Our dump exams & dumps VCE materials are high-quality; our passing rate is higher than others.

Authentic Best resources for 5V0-42.21 Test Engine Practice Exam [Q18-Q40]

Share

Authentic Best resources for 5V0-42.21 Test Engine Practice Exam

[2023] 5V0-42.21 PDF Questions - Perfect Prospect To Go With Dumpexams Practice Exam

NEW QUESTION # 18
A service provider needs to ensure that the NOC is notified proactively in the event that an Edge interface loses connectivity to its WAN provider.
Which three methods are available for generating these alerts? (Choose three.)

  • A. Webhook
  • B. Slack notification
  • C. Push notification via the VMware SD WAN mobile app
  • D. Dyinq Gasp
  • E. Text/SMS
  • F. SNMP Trap

Answer: C,D,E


NEW QUESTION # 19
Which feature is required to prevent a split-brain condition for a branch in an Enhanced HA

  • A. VRRP
  • B. Cloud VPN
  • C. SD-WAN Service Reachable on the private overlay
  • D. Split Brain Detection

Answer: C


NEW QUESTION # 20
Which statement is correct about VMware SD-WAN Orchestrator user roles and their associate privileges?

  • A. Superuser: User can view but cannot create additional admin.
  • B. Enterprise read only: User can view but not modify configurations.
  • C. Standard Admin User can view but cannot manage their customer.
  • D. Customer Support User can view and manage then company's network

Answer: D


NEW QUESTION # 21
During a VMware SD-WAN design session for a core business application, a customer expressed the following requirements:
* Allow business abstraction so that similar policies can be applied across different hardware types.
* Eliminate the need for the operations team to know the type of physical connectivity or the WAN carrier.
* Maintain SLA for real-time application.
Which design should be taken in terms of Link Steering?

  • A. Select Transport Group, and then select Preferred option.
  • B. Deselect Error Correct before Steering Defaults.
  • C. Select WAN Link, and then define the DSCP tagging
  • D. Select Error Correct Before Steering with % definition

Answer: C


NEW QUESTION # 22
A customer is using VMware SD-WAN and has branches in different continents where the Edges are assigned with local Gateways.
Which Gateway should be used so all the branches can build tunnels with one another?

  • A. Primary Gateway
  • B. Regional Gateway
  • C. Super Gateway
  • D. Alternate Gateway

Answer: A


NEW QUESTION # 23
Which feature is required to prevent a split-brain condition for a branch in an Enhanced HA

  • A. VRRP
  • B. Cloud VPN
  • C. SD-WAN Service Reachable on the private overlay
  • D. Split Brain Detection

Answer: D

Explanation:
https://docs.vmware.com/en/VMware-SD-WAN/3.3/VMware-SD-WAN-by-VeloCloud-Administration-Guide/GUID-18DE770F-DF30-485D-8C3F-675D71C57556.html


NEW QUESTION # 24
A network administrator is concerned about an Edge that may be approaching its documented limit for the number of simultaneous tunnels. The historical data showing the number of simultaneous tunnels over the time needs to be checked.
Where can this historical data be found?

  • A. Connect to the Edge CLI via SSH, and /opt/vc/bin/debug-py- tunnel_count
  • B. In the Monitoring section for the Edge in question, navigate to the ''System'' tab.
  • C. In the Remote Diagnostics section of the UI, run the ''Total Counts dump'' test.
  • D. Use the SNMP manage poll the vcelHealthObject tree in the VELOCLOUD-EDGE-MIB

Answer: D


NEW QUESTION # 25
An enterprise has deployed a VMware SD-WAN solution with Edges in many different located to different Partner Gateways.
Which design makes it possible to have dynamic branch to branch VPN tunnels between any two Edges?

  • A. Configure each partner Gateway as a Controller.
  • B. Dedicated at least one Gateway as a Controller, and few initial data plane packets will travers the Controller before dynamic tunnel is established between the two branches.
  • C. Dedicate at least one Gateway as a Controller, and no data plan packets will traverse the Controller before dynamic tunnel is established between the two branches.
  • D. Add Controller role to each Partner Gateway.

Answer: C


NEW QUESTION # 26
Given a VMware SD WAN Branch Edge with Dual Internet links A and B:
* Link A has 50 Mb capacity and latency 10ms
* Link H has 50 Mb capacity and latency 10ms
A database backup of 40Mbps is parted, and the traffic classified as low priority bulk traffic.
Which statement is correct?

  • A. Packets will be sent nut the highest latency link first as this is low priority bulk traffic
  • B. Link Aggregation may take place, and both links could be used.
  • C. DMPO will perform pen How load balancing.
  • D. Packet duplication will take plant? to ensure both links are optimized.

Answer: B


NEW QUESTION # 27
A customer would like to use a VNF firewall on the VMware SU-WAN 600 series Edge.
Where do the Edge firewallrules of the VNF apply?

  • A. Underlay
  • B. WAN side
  • C. Overlay
  • D. LAN side

Answer: B


NEW QUESTION # 28
A service provider wants to offer a common service from its data center via VMware SD-WAN Partner Gateway to many customers with overlapping IP addresses.
Which configuration must be implemented?

  • A. Enable NAT hand off under hand off static routes configuration
  • B. Enable tag type QinQ under hand off interface configuration
  • C. Define multiple segments tor each customer
  • D. Configure source policy-based NAT under business- policies configuration

Answer: C


NEW QUESTION # 29
A service provider assigns two Partner Gateways to a VMware SD-WAN Edge.
Which description is correct about default route.

  • A. A default route 0.0.0.0/0 can be configured as a static route and set to NAT only on the Gateway
  • B. The service provider administrator decides whether the Partner Gateway advertises a default route
    0.0.0.0/0 or not, although it is advertised by default.
  • C. It default route 0 0 0.010 has been configured for both Gateways, internet traffic originated from the Edge can failover to the other Gateway in case of a Gateway failure.
  • D. When handoff is turned off on a Partner Gateway, the Gateway does not advertise a default route 0.0
    0.0/0 to the Edge.

Answer: A


NEW QUESTION # 30
What are three key benefits of VMware SD-WAN? (Choose three )

  • A. Remove requirement of Edge devices
  • B. Reduce the burden on MPLS
  • C. Automated configuration of cloud resources
  • D. Layer 2 VPNs between sites
  • E. Provision Edges in minutes
  • F. Gain visibility across any link

Answer: A,B,C


NEW QUESTION # 31
Which port is used for the high availability connection between the two Edges on a pair of Edge 510s?

  • A. GE4
  • B. Any port may be chosen.
  • C. GE1
  • D. SFP1

Answer: D


NEW QUESTION # 32
A technician at a customer site is deploying VMware SD-WAN Edge 620 notices that the Edge LED is shown amber.
What is the meaning of this LED color?

  • A. Edge is not activated.
  • B. DNS is not reachable from the Edge.
  • C. Edge is still booting.
  • D. Internet is not available from the Edge

Answer: D


NEW QUESTION # 33
During a security-related discussion, an administrator determines that guest users not be able to access any resources on the corporate network.
Which VMware SD-WAN feature can achieve this goal in the most scalable and manageable way?

  • A. VLANs
  • B. Segments
  • C. Firewall
  • D. Business Policy

Answer: B

Explanation:
https://kb.vmware.com/s/article/77153


NEW QUESTION # 34
A VMware SD-WAN customer has a requirement to enable single sign-on (SSO) authentication to their existing provider (idp) for access to their Orchestrator account.
Which authentication protocol is supported?

  • A. OpenID Connect (OlDC)
  • B. LDAP
  • C. TACACS+
  • D. SAML 2.0

Answer: D


NEW QUESTION # 35
A MSP partner needs to setup a Partner Gateway and configure the Handoff Interlace.
Which are the valid configuration options for the Tag type?

  • A. None, 802 1d, 802.1ad, and QinQ(0x8100)/ QinQ(0x9100)
  • B. None. 802. 1q. 802, 1 ad, arid QinQ(0x8100) / QinQ(0x9100)
  • C. None, 802 1q, 802 3ad, and QinQ(0x8100) / QinQ(0x9100)
  • D. None, 802 1q. 802_1ac, and Qin(0x8100) / QinQ(0x9100)

Answer: B


NEW QUESTION # 36
During a security-related discussion, an administrator determines that guest users not be able to access any resources on the corporate network.
Which VMware SD-WAN feature can achieve this goal in the most scalable and manageable way?

  • A. VLANs
  • B. Segments
  • C. Firewall
  • D. Business Policy

Answer: B


NEW QUESTION # 37
Refer to the exhibit.

Which VMware SD-WAN Edge High Availability deployment is being used"?

  • A. Fault Domain HA
  • B. VRRP HA
  • C. Enhanced HA
  • D. Standard HA

Answer: B


NEW QUESTION # 38
Which port is used for communication between VMware SD-WAN Edge and Orchestrator if there are no tunnels established to the Gateways?

  • A. UDP 500
  • B. TCP 443
  • C. UDF 2426
  • D. TCP 80

Answer: C


NEW QUESTION # 39
Due to very strict security policies an enterprise customer is looking for an on-premises deployment of the VMware SD-WAN Orchestrator and Controllers. Customer data is not expected to flow through this Controller, however it is desirable that management plane traffic towards the Orchestrator coming from VMware SD-WAN Edges can take the overlay tunnels through this controls.
What are some of the needed steps to achieve the requirements above?

  • A. Under gateway configuration -> Configure the Gateway roles as Control-Plane, enable Data Plane and Partner Gateway role and add static host mules with NAT hand off settings pointing to the Orchestrator IPs under Partner Gateway advanced hand off settings
  • B. Under gateway configuration -> Configure the Gateway roles as Control Plane, disable Data Plane and enable management plane forward
  • C. Under gateway configuration -> Configure the Gateway roles as Control Plane, disable Data Plane and add static host routes with NAT hand off settings porting to the Orchestrator IPs under Partner Gateway advanced hand off settings
  • D. Under gateway configuration -> Configure the Gateway roles as Control-Plane, enable Data Plant- and Partner Gateway role and add a static default route with NAT hand off settings under Partner Gateway advanced hand oft settings

Answer: A


NEW QUESTION # 40
......

Best updated resource for 5V0-42.21 Online Practice Exam: https://www.dumpexams.com/5V0-42.21-real-answers.html

Realistic Practice 5V0-42.21 VMware SD-WAN Design and Deploy Skills Exam Braindumps: https://drive.google.com/open?id=1uD2w6fTP8URq_y_mOgEIANef_FEH7p-j