[Dec-2024] The Best NCSIE ONTAP NS0-184 Professional Exam Questions
Try 100% Updated NS0-184 Exam Questions [2024]
NEW QUESTION # 17
You have a 4-node ONTAP 9.8 cluster with a FAS8700 HA pair that serves iSCSI LUNs. You are adding a new AFF A250 HA pair to the cluster with new iSCSI SAN LIFs. You need to allow non-optimized data paths from the AFF A250 nodes to the existing LUNs on the FAS8700 nodes.
In this scenario, which two ONTAP configuration settings must you verify? (Choose two.)
- A. port sets
- B. switch zoning
- C. reporting nodes
- D. failover groups
Answer: A,D
NEW QUESTION # 18
You want to add an AFF A400 HA pair to an existing cluster.
In this scenario, which LIF type is required?
- A. cluster-mgmt
- B. data
- C. node-mgmt
- D. intercluster
Answer: D
NEW QUESTION # 19
Click the Exhibit button.
You are adding new DS224C shelves in a new stack to your cluster with FAS8060 controllers running ONTAP 9.7.
Referring to the exhibit, which two actions should be performed to the cluster before installing the new shelves? (Choose two.)
- A. Remove the Ethernet cables.
- B. Move the SAS cables to a new stack.
- C. Disable out-of-band ACP.
- D. Enable in-band ACP.
Answer: B,C
NEW QUESTION # 20
A customer has a current AFF ASA A700 cluster and they want to expand the cluster by adding a second AFF ASA A700 HA pair.
In this scenario, which step would be required to accomplish this task?
- A. Install a BES-53248 cluster switch and convert the AFF ASA A700 from a switchless to switch cluster.
- B. Install a Brocade FC switch and create zoning between the original cluster and the new cluster.
- C. Enable ALUA between the two HA pairs to allow cluster backend traffic.
- D. The customer will need to create a separate cluster for the second AFF ASA A700 pair.
Answer: A
NEW QUESTION # 21
Click the Exhibit button.
A customer has two Cisco 40GbE data switches. They want to connect the switches to an AFF A400 HA pair. The switches and the AFF A400 are approximately seven meters apart.
Referring to the exhibit, which two supported actions would allow you to accomplish this task? (Choose two.)
- A. Change the requirement for optical cables.
- B. Relocate the switches or the AFF A400 so that the distance is less than five meters.
- C. Install 10 meter NetApp supported copper cables.
- D. Change the requirement for Ethernet cables.
Answer: C,D
NEW QUESTION # 22
You are deploying an 8-node AFF A700 by using BES-53248 cluster switches. During the installation, you notice that ports higher than 16 are not coming online. You verify that the additional licenses are installed.
Which two additional steps must be taken to bring the additional ports online? (Choose two.)
- A. Reload the switch
- B. Re-enable each port
- C. Reload the RCF file
- D. Reload the firmware
Answer: A,C
NEW QUESTION # 23
Which two statements are true about the LIFs that are used for a cluster peer relationship? (Choose two.)
- A. The MTU size must be set to 9000 bytes on all the LIFs used for the cluster peering.
- B. At least one LIF per node is required on each cluster.
- C. The LIFs must use the default intercluster service policy.
- D. The LIFs must be in dedicated broadcast domains an IPspaces.
Answer: C,D
NEW QUESTION # 24
You are installing a new ONTAP 9.7 cluster by following the installation and setup poster. You are ready to complete the initial cluster setup. You have connected your laptop to the management switch. However, when browsing the network, you are unable to discover the ONTAP controllers.
Which statement explains this behavior?
- A. You do not have network discovery enabled.
- B. You do not have a static IP address.
- C. You do not have a default gateway set.
- D. You do not have IPv6 configuration set.
Answer: C
NEW QUESTION # 25
Click the Exhibit button.
Immediately after installing a 4-node FAS8200 cluster, you discover that node, "cluster1-02", must be removed from the cluster. You want to use the cluster remove-node command to remove the node.
Referring to the exhibit, which two statements are correct? (Choose two.)
- A. Verify that high availability is configured for failover to the HA partner, then remove the node.
- B. Make the node ineligible by using the cluster modify -eligibility false command, then remove the node.
- C. Move Epsilon to cluster1-02, then remove the node.
- D. Remove the node, then the cluster will elect a new master to remain in quorum.
Answer: A,C
NEW QUESTION # 26
What are two ways to identify an AFF All SAN Array system? (Choose two.)
- A. View the ONTAP System Manager system nodes.
- B. Use the cluster image show CLI command.
- C. Use the san config show CLI command.
- D. View the ONTAP System Manager cluster settings.
Answer: A,C
NEW QUESTION # 27
You are expanding an existing 4-node ONTAP 9.8 cluster with a FAS8300 HA pair by adding a new FAS500f HA pair. Before the expansion, you are asked to save the configuration of the cluster to a backup file.
In this scenario, which two ONTAP configuration backup methods are available? (Choose two.)
- A. storage VM
- B. switch
- C. node
- D. cluster
Answer: A,D
NEW QUESTION # 28
You are expanding an existing cluster that uses BES-53248 cluster interconnect switches. You connected the new controllers to ports 0/17 through 0/20. However, you are unable to join the new nodes to the cluster.
Which action must be taken to solve the problem?
- A. Install the license file.
- B. Install the CSHM configuration file.
- C. Reboot the controllers.
- D. Install the reference configuration file.
Answer: D
NEW QUESTION # 29
You have just racked a new 6-node switched cluster with ONTAP 9.7. You need to configure the cluster switches.
In this scenario, which two elements would be used to complete the configuration? (Choose two.)
- A. serial port
- B. SSH
- C. SFP+ port
- D. rlogin
Answer: A,B
NEW QUESTION # 30
Click the Exhibit button.
You are reviewing the setup of a recently installed FAS9000 switched cluster. As shown in the exhibit, the cluster interconnects are connected to a pair of Cisco Nexus 3132Q-V 40 Gb ports.
For a high availability, which ports should swap Ethernet cables?
- A. Swap node1:e8a and node2:e4a.
- B. Swap node1:e4a and node2:e4b.
- C. Swap node1:e4a and node1:e8a.
- D. Swap node2:e4a and node2:e8a.
Answer: D
NEW QUESTION # 31
You are preparing to physically install a new AFF A400 cluster into a customer's racks. All equipment has been delivered to the customer's site.
Which three tools do you need to complete this installation? (Choose three.)
- A. Phillips #2 screwdriver
- B. slide rail kit
- C. laptop computer
- D. additional network cables
- E. cable management tray
Answer: A,C,D
NEW QUESTION # 32
What are two ONTAP storage efficiency technologies that would be used on an AFF A400 cluster? (Choose two.)
- A. FlashCache
- B. FlexClone volumes
- C. thin provisioning
- D. Flash Pool
Answer: A,D
NEW QUESTION # 33
Click the Exhibit button.
You are installing a new FAS cluster. The management network must be on tagged VLAN 11 for remote administration by a service provider.
Referring to the exhibit, which two ports will allow service provider access to both cluster and node management LIFs? (Choose two.)
- A. e0a-11
- B. e0M
- C. e0M-11
- D. e0b-11
Answer: B,C
NEW QUESTION # 34
You are installing a new AFF A400 cluster and need to access the cluster management LIF from a remote subnet with the fully qualified domain name (FQDN) a400.lab.netapp.com.
In this scenario, which two network components must be configured to log in to ONTAP System Manager from the remote subnet? (Choose two.)
- A. VLAN
- B. DNS
- C. NTP
- D. route
Answer: B,D
NEW QUESTION # 35
......
Network Appliance NS0-184 exam is an excellent opportunity for IT professionals who want to demonstrate their expertise in NetApp storage installation. NS0-184 exam is designed to test the skills and knowledge of candidates in a variety of areas related to NetApp storage solutions. Passing NS0-184 exam is a significant achievement that will enhance the credibility and career prospects of any IT professional.
NS0-184 Exam Questions Get Updated [2024] with Correct Answers: https://www.dumpexams.com/NS0-184-real-answers.html
Pass NS0-184 Exam - Real Questions and Answers: https://drive.google.com/open?id=1I4TuB7ldt0LymmpX8vRjtXlUblI4k7oN