Excellent NCM-MCI5.15 Updated 2021 Dumps With 100% Exam Passing Guarantee
Best way to practice test for Nutanix NCM-MCI5.15
NEW QUESTION 42
An administrator is monitoring the Nutanix v5.15-based AOS cluster performance logs and notices that a SQL server VM is greatly exceeding its intended maximum IOPS. The administrator has confirmed that a QoS policy was previously created for the group of VMs this server is a member of.
What are two reasons that this VM would exceed its maximum configured IOPS from the QoS Policy? (Choose two.)
- A. The VM is missing the required snapshot needed to implement the QoS Policy.
- B. The SQL Server VM has volume groups attached.
- C. It was cloned from another SQL Server VM that was a member of the QoS Policy.
- D. The VM was not created as an AFS virtual machine.
Answer: B,D
Explanation:
Ref: https://portal.nutanix.com/page/documents/details?targetId=Prism-Central-Guide-Prism-v5_18:mul-storage-qos-pc-c.html
NEW QUESTION 43
A customer needs a DR solution designed around the following requirements:
* There are 8 ms of latency between Sites A and B
* The administrator needs the shortest RPO/RTO possible
* Application consistent snapshots are required
* Use of Nutanix VSS
Which Data Protection Method should be used?
- A. Async
- B. Metro Availability
- C. Cloud Connect
- D. Near Sync
Answer: D
Explanation:
Ref: https://portal.nutanix.com/page/documents/details?targetId=Prism-Element-Data-Protection-Guide-v5_18:wc-dr-application-consistent-snapshots-wc-r.html
NEW QUESTION 44
Refer to the exhibit.
A Microsoft SQL 2016 deployment is shown in the exhibit. The administrator receives user reports that database queries take too long to return.
Which optimization should be made to this configuration to improve performance?
- A. Combine both of the OS and SQL Binaries disks
- B. TempDB, and Logs disk Separate the Database. TempDB, and Logs onto their own disks
- C. Configure the VM to use a PCI disk controller
- D. Add a second SCSI controller for the Database.
Answer: B
NEW QUESTION 45
A customer has the following requirement for a Nutanix cluster:
Must support high-performance Nutanix Volumes iSCSI workloads
Must utilize AHV nodes
Must use 10 GbE interface
How should the customer optimize networking?
- A. Convert Cluster to ESXi and enable Jumbo Frame on Host and CVM
- B. Enable the use of Jumbo Frame on Host and CVM
- C. Enable Jumbo Frame on just the Host
- D. Enable Jumbo Frames on just the CVM
Answer: C
NEW QUESTION 46
Refer to the exhibit.
An administrator is commissioning a Nutanix Enterprise Cloud. Once the user VMs have been deployed and are running, the administrator finds that VMs on the same host are able to communicate, but are unable to communicate between hosts.
What must be changed to enable full inter-VM communications?
- A. Change the spanning-tree port type on the switch
- B. Change the network the VMs are connected to
- C. Update the switch to specifically allow VLAN 15
- D. The VMs need to have static IP addresses
Answer: C
Explanation:
Ref: https://hyperhci.com/2019/11/09/nutanix-ahv-enable-vlan-trunk-mode-on-guest-vm/
NEW QUESTION 47
An administrator needs to deploy an application with a large amount of data connected via Nutanix Volumes.
Which two actions should the administrator take when designing the Volume Group? (Choose two.)
- A. Enable RSS (Receive Side Scaling)
- B. Distribute workload across multiple virtual disks
- C. Enable thick provisioning on the Volume Group(s)
- D. Use multiple subnets for iSCSI traffic
Answer: A,B
Explanation:
NEW QUESTION 48
An administrator of a Nutanix Enterprise Cloud has microsegmentation enabled and a firewall VM installed. The security team notifies the administrator that one of the VMs hosted in the environment has been exhibiting suspect network activity. The administrator wants to isolate the VM from the production network, but must still be able to access it to perform diagnostics.
What should the administrator do to meet the requirement?
- A. Create a security policy with a service chain directing that VMs traffic to the firewall VM
- B. Disable the vNIC on the affected VM
- C. Create a firewall rule that blocks VM traffic but permits diagnostic access
- D. Quarantine the VM using the Forensic Method
Answer: D
Explanation:
Ref https://portal.nutanix.com/page/documents/kbs/details?targetId=kA00e000000LIelCAG
NEW QUESTION 49
An administrator receives reports that VDI desktop performance in an 8-node Nutanix VDI environment is poor. Opening applications takes between 1 and 2 minutes.
When investigating the issue, the following conditions are found:
* Cluster memory utilization: 80%
* Cluster SSD utilization: 70%
* Average VM CPU Wait Time: 11%
* CVM CPU utilization: 75%
Which action should be taken to improve VDI performance?
- A. Add CPU resources to the cluster.
- B. Increase the amount of SSD storage in the cluster.
- C. Increase the number of vCPU cores allocated to the CVM.
- D. Add memory to the nodes in the cluster.
Answer: A
NEW QUESTION 50
Microsegmentation was recently enabled in a Nutanix environment. The administrator wants to leverage Prism Central to create a policy that will block all traffic, regardless of direction, between two groups of VMs identified by their category.
Which policy should be used to meet this requirement?
- A. A Whitehst-Based Policy
- B. An Application Security Policy
- C. An Isolation Environment Policy
- D. A Quarantine Policy
Answer: C
Explanation:
NEW QUESTION 51
An administrator wants to utilize Network Visualization to monitor the physical and logical network on the Nutanix cluster. The first-hop switch has LLDP enabled. The network switch information is still not being displayed.
What is causing this problem?
- A. SNMP is not configured properly.
- B. br0 and br1 are not defined.
- C. The ISL between switches is not configured.
- D. The cluster is using RDMA-enabled NICs.
Answer: A
Explanation:
ref: https://portal.nutanix.com/page/documents/details?targetId=Web-Console-Guide-Prism-v55:wc-network-visualization-intro-c.html
NEW QUESTION 52
After the migration, some SQL queries take longer to execute than prior to migration.
The following SQL best practices were applied while creating the SQL VM on Nutanix:
* 8 vDisks per SQL server VM
* Database and Log files on separate vDisk
* 2 TempDB database drives and 1 TempDB log drive
What should the administrator to do improve the SQL Server performance?
- A. Create multiple TempDB data files and enable autogrowth
- B. Redistribute existing data by creating additional database file and enable autogrowth
- C. Redistribute existing data by creating additional database files and disable autogrowth
- D. Create multiple SQL log files and disable autogrowth
Answer: B
NEW QUESTION 53
An administrator is planning to deploy a Nutanix cluster to support a few high-performance VMs. This deployment will have the following considerations:
* Individual VMs will likely generate network throughputs in the range of 90-100Mbps
* Due to the configuration of the VMs, it is unlikely that a node will host more than one or two of them at a time
* Individual VMs will communicate with only a few (one or two) remote hosts at a time
* Multicast will not be used in the environment
* The hosts are connected via two 1GbE network connections
How should the administrator configure the network bonds to meet this requirement while maintaining the simplest switch configuration?
- A. Configure bond0 as balance-lacp
- B. Configure bond0 as balance-sib
- C. Configure bond0 as active-backup
- D. Configure bond0 as balance-tcp
Answer: B
Explanation:
Ref: https://portal.nutanix.com/page/documents/solutions/details?targetId=BP-2071-AHV-Networking:top_ahv_networking_best_practices.html
NEW QUESTION 54
An administrator is migrating 5MB shares from a third-party platform to Nutanix Files with the following characteristics:
* Shares contain user profile directories
* DFS-N will be used
How should the administrator create target shares for this migration?
- A. Create multiple distributed shares and distribute migrated data as evenly as possible.
- B. Create multiple general purpose shares and distribute migrated data as evenly as possible.
- C. Create distributed shares with multiple top-level directories and distribute migrated data.
- D. Create standard shares with multiple top-level directories and distribute migrated data.
Answer: C
Explanation:
Ref: https://portal.nutanix.com/page/documents/details/?targetId=Files-v3_6:Files-v3_6
NEW QUESTION 55
An administrator inherits a new Nutanix environment and logs in to a CVM to check the network configuration. The configuration is as follows:
Which action should the administrator take to improve network performance?
- A. Remove one 10 Gbs interface from br0-up to make sure all 10 Gbs can be used.
- B. Configure VLAN tagging both on br0 and br1 and their physical interfaces.
- C. Add eth0 and eth1 to the br0-up bond
- D. Configure balance-sib or balance-tcp mode for br0-up if switch configuration allows
Answer: D
NEW QUESTION 56
An administrator is currently using both 10g uplink with LACP and balance-tcp. A single VM should not be allowed to use more than a single 10G uplink, and both uplinks should be utilized.
Which two command should be used to configure the bond? (choose two)
- A. Ovs-vsctl set port br0-up other_config: bond-rebalance-interval=30000
- B. Ovs-vsctl set port br0-up bond_mode=balance-tcp
- C. Ovs-vsctl set port br0-up bond_mode=balance-slb
- D. Ovs-vsctl set port br0-up bond_mode=active-backup
Answer: A,C
NEW QUESTION 57
......
Nutanix Certified Master - Multicloud Infrastructure (NCM-MCI-5.15) Certification Sample Questions and Practice Exam: https://www.dumpexams.com/NCM-MCI5.15-real-answers.html