[Feb 03, 2022] Get New 72200X Practice Test Questions Answers
72200X Dumps and Exam Test Engine
Conclusion
Now that you have profound information about the Avaya 72200X exam, it will be much easier for you to decide whether or not this journey is for you. Make sure you are more than 100% ready to dive into the test preparation so you will have a more fruitful certification path. And if you have decided to pursue this exam, don’t forget to maximize the courses mentioned on the list. All these are aimed for a smooth and successful exam quest.
NEW QUESTION 19
A customer states they are having voice quality issues when they make calls over a WAN link. You would like to see whatthe Quality of Service is for a call, as the customer makes the call.
Which Avaya Aura Communication Manager (CM) SAT command will display packet loss and jitter for a call in progress?
- A. list monitor qos
- B. list trace station xxxx, where XXXX is the station number.
- C. monitor station qos xxxx, where XXXX is the station number
- D. status station qos xxxx, where XXXX is the station number
Answer: B
NEW QUESTION 20
After implementation, Avaya Aura Session Manager (SM) replication status is Not Polling, and both replica nodes are not reachable. Thenetwork connectivity has been verified, although Avaya Aura System Manager (SMGR) cannot connect to SM, but can connect other network components.
Based on an analysis of what is working and not working, where should the administrator try to isolate the issue?
- A. Avaya Aura Communication Manager (CM)
- B. Avaya Aura System Manager (SMGR)
- C. Avaya Aura Utility Server (US)
- D. Avaya Aura Session Manager (SM)
Answer: D
NEW QUESTION 21
A customer states they are having voice quality issues when they make calls over a WAN link. You would like
to see the VOIP call quality information for this call while it is in progress.
Which Avaya Aura Communication Manager (CM) SAT command will display packet loss and jitter for a call
in progress?
- A. list trace station xxxx, where xxxx is the station number
- B. status station qos xxxx, where xxxxis the station number
- C.
- D. monitor station qos xxxx, where xxxx is the station number
list monitor qos
Answer: A
NEW QUESTION 22
You are configuring Shared Bandwidth Management for Call Admission Control (CAC) between Communication Manager (CM) and Session Manager (SM).
Which two tasks must you perform to achieve this? (Choose two.)
- A. Create Locations in Session Manager
- B. Create Network Region Groups (NRG) in Communication Manager
- C. Specify the shared bandwidth limit on the Communication Manager (SIP) Entity screen
- D. Create a Bandwidth Share Group in SM
- E. Match the Network Region used for the SIP users with the Domain in SM
Answer: C,D
NEW QUESTION 23
You are submitting a package of information to Avaya Support for a case you are raising. The files that you are
sending include a trace taken using WireShark.
Which file format will the file be in?
- A. jpg
- B. rar
- C. ws
- D. pcap
Answer: D
NEW QUESTION 24
In a SIP trace capturing PPM messages, which device sends the getCallHistory PPM request, and what is it requesting?
- A. the SIP endpoint; It isrequesting its call log to be retrieved from Session Manager.
- B. the Avaya Aura Session Manager (SM) server; It is requesting the call history from System Manager.
- C. System Manager; It is requesting the call log history from Communication Manager.
- D. the SIP endpoint; It is requesting its contact list to be retrieved from Session Manager.
Answer: A
NEW QUESTION 25
Ignoring Presence, to be fully functional, how many event package does an AST endpoint subscribe to?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
NEW QUESTION 26
What is the purpose of a Virtual (Intervening) Network Region?
- A. To allow one Network Region to temporarily use bandwidth allocated to another Network Region if it runs
out of bandwidth - B. To provide temporary overflow bandwidth when the direct allocation of bandwidth between connected
Network Regions is not available - C. To simplify bandwidth management between Network Regions connected via a WAN
- D. To allow Inter-Gateway Alternate Routing (IGAR)
Answer: C
NEW QUESTION 27
Refer to the Exhibit.
Which twostatements about a call from AST 1011111 to Remote Worker AST 1011112 are true? (Choose two.)
- A. Avaya Session Border Controller for Enterprise (SBCE) needs to be built as a trusted SIP Entity and Entity link for remote workers.
- B. SIP Signaling traverses the Avaya Session Border Controller for Enterprise (SBCE) and the Media must bypass the SBCE.
- C. As far as Avaya Aura Session Manager (SM) is concerned, all Remote Worker phones are registering from an IP address equal to the Avaya Session Border Controller for Enterprise (SBCE) Remote Worker Private IP address.
- D. Avaya Session Border Controller for Enterprise (SBCE) periodically sends SIP Options to 1011112 looking for a 200 ok response to check it isreachable.
- E. The configuration ofa Remote Worker AST is the same as an Office Worker AST in the Avaya Aura System Manager (SMGR) user profiles.
Answer: C,E
NEW QUESTION 28
How can you obtain a list of Avaya Aura Communication Manager (CM) alarms that have been raised today, including previous alarms that are no longer active using CM SAT?
- A. Run the display alarm previous command and submit the form.
- B. Run the display alarms command then changed the resolve? Filed from N TO Y and submit the form.
- C. Run the display alarms command, then change the Historical?' filed from N To Y and submit the form.
- D. Run the display alarm command, then change the previous? Filed from N to Y and submit the form.
Answer: B
NEW QUESTION 29
Avaya support is monitoring a telephone system that is going down several times per day. They discovered a software error that keeps triggering an auto restart.
Which command can be used to determine the root cause?
- A. display restart all
- B. display initcauses
- C. display interchangestatus
- D. display reset 4 all
Answer: B
NEW QUESTION 30
How can you show that a session is actually reaching the Avaya Aura Media Server (AAMS)?
- A. From Avaya Aura System Manager (SMGR) home page, click on theMedia Server, and click on the link: list active sessions.
- B. In AAMS Element Manager, Select System Status > Element Status > More Actions > display active sessions.
- C. From SSH, go to the AAMS and issue the list active sessions current. command.
- D. In AAMS Element Manager select Monitoring > Active Sessions.
Answer: D
NEW QUESTION 31
How can you show that a session is actually reaching the Avaya Aura Media Server (AAMS)?
- A. In AAMS Element Manager, Select System Status > Element Status > More Actions > display active sessions.
- B. From Avaya Aura System Manager (SMGR) home page, click on the Media Server, and click on the link:
list active sessions. - C. In AAMS Element Manager select Monitoring > Active Sessions.
- D. From SSH, go to the AAMS and issue the list active sessions current.command
Answer: C
NEW QUESTION 32
The client has finished deploying Avaya Aura Communication Manager (CM) and has signed a service contract with Avaya for technical support.
Whatshould be done by the system administrator in CM to allow Avaya services to login and support the platform?
- A. It is not necessary to do something. Avaya Services can access by default
- B. EASGTurnOn
- C. EASGManage -enableEASG
- D. EASGManage -disableEASG
- E. EASGManage -turnonEASG
Answer: C
NEW QUESTION 33
A customer reports that when they make a call from an H.323 endpoint at the Main office to an H.323 telephone at the Branch office across the WAN, the call fails due to codec mismatch.
If misconfigured, which three Avaya Aura Communication Manager (CM) System Administration Terminal (SAT) forms can be causing this problem? (Choose three.)
- A. ip-services
- B. ip-network-region
- C. node-names ip
- D. ip-codec-set
- E. ip-network-map
Answer: B,D,E
NEW QUESTION 34
How can an inactive SM100 be reset?
- A. Restart Services on the Avaya Session Border Controller for Enterprise (SBCE).
- B. Click the repair button on the Replication page with the affected Avaya Aura Session Manager (SM) selected.
- C. Run the resetSM100 command from RHEL Command Line Interface of Avaya Aura Session Manager (SM)
- D. Click the 'Reset' button on the Security Module Status page in Avaya Aura System Manager (SMGR).
Answer: C
NEW QUESTION 35
Who is responsible for completing Discipline 4 - Determining Root Cause, of the 8D Troubleshooting Methodology?
- A. Avaya Tier 3
- B. Avaya Tier 4
- C. Avaya Tier 1
- D. Avaya Tier 2
Answer: A
NEW QUESTION 36
How can you show that a session is actually reaching the Avaya Aura Media Server (AAMS)?
- A. In AAMS Element Manager, Select System Status > Element Status > More Actions > displays active sessions.
- B. From Avaya Aura System Manager (SMGR) home page, click on the Media Server, and click on the link:
list active sessions. - C. In AAMS Element Manager select Monitoring > Active Sessions.
- D. From SSH, go to the AAMS and issue the list active sessions current.command
Answer: C
Explanation:
Explanation/Reference:
NEW QUESTION 37
When a 96xx telephone with SIP firmware boots up, it goes through a number of steps. These steps include:
1. Phone Registration.
2. Download PPM.
C. Obtain IP Address and Utility Server address DHCP Server.
4. Check if firmwareupgrade is required and download 46xxsettings.txt file.
5. Send Subscribe (avaya-cm-feature-status) to Avaya Aura Communication Manager (CM) via Avaya Aura Session Manager (SM).
What is the correct sequence of these steps?
- A. 3, 5, 1,2, 4
- B. 3, 4, 2, 1, 5
- C. 3, 1, 5, 1, 2
- D. 4, 3, 1, 2, 5
- E. 3, 4, 1, 5, 2
Answer: E
NEW QUESTION 38
Which two statements regarding the core architecture in the Avaya Aura 7 solution are true? (Choose two.)
- A. SIP trunks can only be configured on Avaya Aura Session Manager (SM).
- B. SIP User Agents can register to Avaya Aura Communication Manager (CM) or Avaya Aura Session Manager (SM).
- C. Avaya Aura Media Server (AAMS) connects directly to Avaya Aura Communication Manager (CM) using SIP.
- D. SIP user Agents register withAvaya Aura Session Manager (SM).
- E. Avaya Aura Media Server (AAMS) cannot connect to Avaya Aura Communication Manager (CM) without routing via Avaya Aura Session Manager (SM).
Answer: C,D
NEW QUESTION 39
Which three statements about media processing resources (DSPs) are true? (Choose three.)
- A. H.323-H.323 two-party calls will always shuffle to establish a direct media path if Communications Manager (CM) is configured to do so.
- B. Two-party calls originated by H.323 stations, trunks, or media gateways, and terminated by SIP stations or trunks, cannot shuffle.
- C. If a direct media path cannot be established between two IP endpoints the call will fail from release 7.0.
- D. SIP-SIP two-party calls will always use SIP Direct Media if Communication Manager (CM) is configured to do so.
- E. Two-party calls originated by SIP stations or trunks, and terminated by H.323 trunks, media gateways, or other vendors' H.323 stations, will typically shuffle if Communications Manager (CM) is configured to do so.
Answer: B,C,D
NEW QUESTION 40
Which two traceSM options can be useful when trouble-shooting SIP endpoint registration issues with a phone using TCP protocol? (Choose two.)
- A. SIP Registration
- B. Call Processing
- C. PPM
- D. TLS Handshaking
Answer: A,D
NEW QUESTION 41
How can an inactive SM100 be reset?
- A. Restart Services on the Avaya Session Border Controller for Enterprise (SBCE).
- B. Run the resetSM100command from RHEL Command Line Interface of Avaya Aura Session Manager
(SM). - C. Click the Reset button on the Security Module Status page in Avaya Aura System Manager (SMGR).
- D. Click the repair button on the Replication page with the affected Avaya Aura Session Manager (SM)
selected.
Answer: B
NEW QUESTION 42
How can you check to see if the Avaya Aura Session Manager (SM) application processes are running?
- A. Execute the SM status all command.
- B. Execute the SM CLI statapp command.
- C. On the SM dashboard select Status Applications from the Service State pull-down menu.
- D. On the SM dashboard select StatusApplications from the Shutdown System pull-down menu.
Answer: B
NEW QUESTION 43
......
2022 New Dumpexams 72200X PDF Recently Updated Questions: https://www.dumpexams.com/72200X-real-answers.html