Try 300-610 Free Now! Real Exam Question Answers Updated [Oct 14, 2023]
Get Ready to Pass the 300-610 exam with Cisco Latest Practice Exam
Cisco 300-610 exam is an excellent opportunity for IT professionals to showcase their skills and knowledge in designing data center infrastructure solutions using Cisco technologies. Successfully passing 300-610 exam can lead to career advancement opportunities and increase job prospects in the IT industry.
NEW QUESTION # 13
An engineer is designing a Cisco Nexus 7000 Series disaster recovery site using the data center interconnect solution to provide gateway redundancy and needs to ensure that devices use gateways in their own data centers.
Which design approach should be used to accomplish this goal?
- A. FHRP localized to its own data center
- B. CFS localized to its own data center
- C. vPC localized to its own data center
- D. STP localized to its own data center
Answer: A
NEW QUESTION # 14
A network architect designs a high-availability architecture for the Cisco UCS Fabric interconnects that installed in a data center. The architecture must support clustering and redundancy. Which architecture meets these requirements?
- A. dual connections from port L1 to 12 and one connection from port L2 to L1 with twinax cables
- B. dual connections from port L1 to L1 and one connection from port L2 to L2 with Ethernet cables
- C. dual connections from port L1 to L1and one connection from port L1 to L1 with twinax cables
- D. dual connections from port L1 to L2 and one connection from port L2 to L1 with Ethernet cables dual
Answer: B
Explanation:
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/sw/gui/config/guide/1-0-2/b_GUI_Config_Guide/GUI_Config_Guide_chapter4.pdf
NEW QUESTION # 15
An engineer enables the HSRP feature on a Cisco Nexus 7000 Series Switch. It must be ensured that the switch manages packets that are sent to the local vPC MAC address, remote vPC MAC address, and HSRP virtual MAC address.
Which command accomplishes this goal?
- A. map-server
- B. hsrp preempt
- C. peer-switch
- D. peer-gateway
Answer: B
NEW QUESTION # 16
An engineer requires a solution that achieves Ethernet traffic forwarding on all available paths from the hosts to the Cisco Nexus Fabric Extender and from the Fabric Extenders to the Cisco Nexus 5000 Series Switches. The NIC teaming from the Fabric Extender to a server should use an LACP EtherChannel. Which solution should be implemented to meet these requirements?
- A. Virtual Port Channel
- B. Enhanced Virtual Port Channel
Answer: B
Explanation:
C. Virtual Port Channel Plus (vPC+) D. Back-to-Back Virtual Port Channel
NEW QUESTION # 17
What are two functions of a Network Services Orchestrator in an NFV environment? (Choose two.)
- A. It provides a standards-based southbound interface for transparent integration with systems that operate at the customer-facing services layer.
- B. It provides an API-based northbound interface for transparent integration with systems that operate at the resource-facing services layer.
- C. It operates at the resource-facing services layer and provides overall lifecycle management at the network service level.
- D. It operates at the customer-facing services layer and provides the management interface for the virtual network devices.
- E. It provides a standards-based northbound interface for transparent integration with systems that operate at the customer-facing services layer.
Answer: B,C
Explanation:
Section: Automation Design
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/net_mgmt/msx/3_4/solution_overview/ Cisco_VMS_Sol_Overview.pdf
NEW QUESTION # 18
A customer needs to deploy a three-tier network architecture that will consist of web, and other business-critical applications. The solution will include Cisco UCS 6324 Fabric interconnects managing B and C Series servers The Fabric interconnects will be connected to the cisco nexus 7706 series switch for network access. A storage array will be directly connected to the UCS deployment. Which type must be used to meet these requirements?
- A. UCS Interconnect in Ethernet end-host mode
UCS Interconnect in Fibre Channel switching mode
Fabric Interconnects uplinked to the Nexus device using an LACP port-channel in active mode - B. UCS Interconnect in Ethernet end-host mode
UCS Interconnect in Fibre Channel end-host mode
Fabric Interconnect uplinked to me Nexus device using an LACP port-channel in passive mode - C. UCS Inter conned in Ethernet switching mode
UCS interconnect in Fibre Channel end-host mode
Fabric Interconnects uplinked to the Nexus device using an LACP port-channel in active mode - D. UCS Interconnect in Ethernet switching mode
UCS interconnect to Fibre Channel switching mode
Fabric Interconnect uplinked to the Nexus device using an LACP port-channel in passive mode
Answer: A
Explanation:
FC must be in switching mode for Direct Attached Storage.
NEW QUESTION # 19
A network architect proposes a distinct Fibre Channel fabric to be used for a Cisco UCS blade server that hosts critical applications. Which action should be implemented for the fibre Channel traffic from the vHBA of this service to pass through the I/O module in the Cisco chassis to a specified uplink Fibre Channel port?
- A. Update the applled global QoS policy.
- B. Update the applled Fibre Channel adapter policy.
- C. Enable persistent binding in the vHBA policy.
- D. Include a SAN pin group in the vHBA policy.
Answer: D
Explanation:
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-manager/GUI-User-Guides/Storage-Mgmt/3-2/b_UCSM_GUI_Storage_Management_Guide_3_2/b_UCSM_GUI_Storage_Management_Guide_3_2_chapter_0110.pdf
NEW QUESTION # 20
Which Ethernet to Cisco Fabric Interconnect connectivity configuration is supported when FCoE is implemented?
- A. VSS that has unified uplinks
- B. Ethernet and unified ports on the same port channel
- C. vPC that has unified uplinks
- D. cross-connections with pinning
Answer: C
NEW QUESTION # 21
What influences the number of ISLs that are required between Cisco MDS Series switches?
- A. FCoE protocol
- B. type of storage
- C. end-to-end oversubscription ratio
- D. N Port virtualization
Answer: C
NEW QUESTION # 22
Drag and drop the feature descriptions from the left onto the correct UCS Fabric Interconnect modes on the right.
Answer:
Explanation:
NEW QUESTION # 23
Refer to the exhibit.
Server 1 fails to connect to the storage array over the Storage Area Network (SAN) of the Cisco NDS 9000 Series Switch. The requirements are to redesign the storage network and keep these considerations in mind:
The traffic from each of the server must be redundant and isolated.
The design must tolerate hardware and software failures and upgrades of SAN fabric devices.
Which action must be taken to meet these requirements?
- A. Place an additional Fibre Channel switch to create two physically independent storage fabrics.
- B. Create a SAN port channel that faces the storage device to sustain a link failure.
- C. Add an additional supervisor to the Fibre Channel switch to support nondisruptive upgrades.
- D. Enable NPV and F-Port-channel on ports that face Server 1 on the Fibre Channel switch to create redundant paths.
Answer: D
NEW QUESTION # 24
Drag and drop the data center technologies from the left onto the correct descriptions on the right. Not all technologies are used.
Answer:
Explanation:
NEW QUESTION # 25
Drag the requirements from the left onto the correct policy types on the right.
Answer:
Explanation:
NEW QUESTION # 26
Drag the requirements from the left onto the correct policy types on the right.
Answer:
Explanation:
NEW QUESTION # 27
Drag and drop the feature descriptions from the left onto the correct UCS Fabric Interconnect modes on the right.
Answer:
Explanation:
NEW QUESTION # 28
Refer to the exhibit.
What must be the default gateway of the servers in EPG Web?
- A. NAT appliance
- B. subnet address of BD1
- C. subnet address of L3Out
- D. subnet address of BD2
Answer: A
NEW QUESTION # 29
A company has several data centers with hundreds of Cisco UCS blade chassis. A network consultant plans to active Cisco Discovery Protocol to the servers to facilitate Layer 1 troubleshooting. For security reasons, the company wants to restrict the servers from sending different MAC addresses to the fabric interconnect after the MAC address from the first packet is learned. Which two policies be modified to support this design? (Choose two.)
- A. Network Control Policy
- B. Ethernet Adapter
- C. vNIC Template Policy
- D. vNIC Policy
- E. Pin Group Policy
Answer: A,C
Explanation:
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-manager/GUI-User-Guides/Network-Mgmt/4-0/b_UCSM_Network_Mgmt_Guide_4_0/b_UCSM_Network_Mgmt_Guide_4_0_chapter_01010.html
https://jeremywaldrop.wordpress.com/2010/05/03/how-to-enable-cdp-on-cisco-ucs-vnics/
NEW QUESTION # 30
Drag and drop the technologies from the left onto the correct descriptions on the right.
Answer:
Explanation:
NEW QUESTION # 31
Drag and drop the configurations from the left onto the correct policies on the right.
Answer:
Explanation:
NEW QUESTION # 32
Drag and drop the configurations from the left onto the correct policies on the right.
Answer:
Explanation:
NEW QUESTION # 33
......
Pass Your Next 300-610 Certification Exam Easily & Hassle Free: https://www.dumpexams.com/300-610-real-answers.html
Get Prepared for Your 300-610 Exam With Actual Cisco Study Guide!: https://drive.google.com/open?id=17e4Ot1PP17XG0GBmmG0Yon6y2Br1sCG1