Get 100% Passing Success With True JN0-1362 Exam! [Aug-2021]
Juniper JN0-1362 PDF Questions - Exceptional Practice To Service Provider Design, Specialist (JNCDS-SP)
NEW QUESTION 26
Your client asked you to design a solution with the requirements shown below.
- Have better traffic engineering for applications across an existing MPLS core.
- Support both IPv4 and IPv6 traffic
- Work with an MX Series core.
- Work with a North Star Controller
- Work with existing IGP (ISIS)
Which feature would you recommend be implemented in this solution?
- A. CoS-based forwarding
- B. zero touch provisioning
- C. opaque area LSAs
- D. segment routing
Answer: D
NEW QUESTION 27
You are asked to design a Cloud CPE solution that can dynamically add new sites to an existing MPLS Layer 3 VPN. The CPE for each new site must support the service chaining of multiple VNFs.
Which Juniper Networks Cloud CPE solution supports these requirements?
- A. Distributed Cloud CPE - Managed Internet
- B. Distributed Cloud CPE - Option 1
- C. SD-WAN
- D. Centralized Cloud CPE
Answer: B
NEW QUESTION 28
Your backbone network has a single dark fiber between two backbone sites within the same metro area. Currency this link is being used as a point-to-point 100ObE link between the routers using gray optics. The link has been experiencing high utilization and you are asked to propose network design changes to increase capacity across this network segment.
Which statement is true in this scenario?
- A. New optical interfaces will need to be added to the routers.
- B. Enabling MPLS will increase capacity due to statistical multiplexing.
- C. Gray optics can be used to increase capacity by enabling additional wavelengths.
- D. Interfaces need to be reconfigured for 200GbE.
Answer: A
NEW QUESTION 29
You are designing several MPLS virtual routing and forwarding (VRF) instances on all provider edge (PE) routers. Routes within each VRF should be exchanged between all PE routers provisioned for that VRF.
For each VRF routing instance which two attributes must match on all related PE routers? (Choose two )
- A. interfaces
- B. router ID
- C. instance type
- D. VRF target
Answer: C,D
NEW QUESTION 30
Which two statements about a customer's WAN connectivity are correct? (Choose two)
- A. SD-WAN dynamically manages customer traffic across multiple WAN connections.
- B. Layer 3 managed services automatically include Layer 2 provisioning to support the customer's needs.
- C. SD-WAN requires an IPsec tunnel to connect customer sites across the Internet.
- D. Layer 2 managed services connects the customer's sites and the customer provides their own routing capability.
Answer: A,D
NEW QUESTION 31
You are creating an MPLS design proposal for a customer that requires traffic engineering features through their core MPLS network. The customer has edge routers that only support LDP signaling.
Which two features would you propose using in this scenario? (Choose two)
- A. RSVP tunneling
- B. LDP
- C. RSVP
- D. LDP tunneling
Answer: C,D
NEW QUESTION 32
Your customer requires redundant routers and wants to use VRRP for the default gateway at their Internet edge.
Which two statements are correct in this scenario? (Choose two )
- A. VRRP for IPv6 provides a much faster switchover to an alternate default router than IPv6 neighbor discovery procedures
- B. The VRRP master and backup send advertisements to each other at regular intervals.
- C. VRRP dynamically elects master and backup routers
- D. VRRP will only support two routers
Answer: B,C
NEW QUESTION 33
You want to implement Source Packet Routing in Networking (SPRING) in your network core using MPLS as the data plane for traffic engineering purposes.
In this scenario what are two protocols that would be used to distribute the segment IDs? (Choose two )
- A. LDP
- B. IS-IS
- C. RSVP
- D. OSPF
Answer: B,D
NEW QUESTION 34
Which two statements describe why service providers have migrated to IP/MPLS networks? (Choose two.)
- A. The MPLS ingress router encapsulates IP packets in an MPLS frame and forwards it to the next router in the path.
- B. MPLS virtualization allows a service provider to use statistical multiplexing to maximize resource utilization.
- C. A single router can be an ingress, egress or transit router for multiple LSPs simultaneously.
- D. MPLS labels enable several logically separated networks to share a common network infrastructure.
Answer: B,D
NEW QUESTION 35
Your company is designing a new data center in a remote location that must be connected to your local data center. You have a service provider connection between the CE devices at each site. You want to implement EVPN with VXLAN services between sites, but the service provider does not offer EVPN services.
Which two statements are true in this scenario? (Choose two )
- A. The provider's edge devices must map your VXLAN VNIs to MPLS LSPs within the provider network at each site
- B. You can still implement EVPN service across the service provider as long as there is IP reachability between the sites.
- C. The customer's edge devices within your data center can act as VXLAN Layer 2 gateways
- D. The service provider must provide an MPLS-based VPN connection between sites
Answer: B,C
NEW QUESTION 36
Your WAN links are on a VPLS service from a single service provider. You must verify device configuration power and status in the event of a service outage.
Which two actions provide out-of-band management to your edge routers? (Choose two)
- A. Connect each Ethernet management interface to a dedicated switch with traffic routed on its own subnet on the VPLS service
- B. Connect each serial management port to a console server with a cellular Internet connection
- C. Connect each Ethernet management interface to a dedicated switch with its own WAN connection.
- D. Place management traffic on a separate VLAN on the VPLS service
Answer: B,C
Explanation:
https://www.wti.com/t-remote-console-and-power-management-for-juniper-switches-and-routers.aspx
NEW QUESTION 37
Your customer connects to their service providers using fiber-based Ethernet connections in a shared collocation room. The customer has expressed concerns about wire tapping and man-in-the-middle attacks, and has asked for your design recommendation to minimize such attacks.
Which service addresses the customer's concern?
- A. MACsec
- B. BGPFIowSpec
- C. 802 1x
- D. 802 3ad
Answer: A
NEW QUESTION 38
MPLS services are being delivered from provider edge (PE) routers Each PE is connected to multiple customer edge (CE) routers.
What should you use on the PE to isolate customer routes?
- A. VPN routing and forwarding tables
- B. external BGP
- C. port access control lists
- D. access control lists
Answer: A
NEW QUESTION 39
Which management platform automates and simplifies the management of Juniper Networks switching, routing, and security products?
- A. Junoscope
- B. Junosphere
- C. Junos Space
- D. Juniper Secure Analytics
Answer: C
NEW QUESTION 40
Your customer requires virtual machine mobility between two data centers, and they are pursuing a managed service.
Which solution would satisfy the customer's requirement?
- A. a routed service
- B. an EVPN service provided over IP
- C. an IPsec VPN service between CE routers
- D. an L3VPN service
Answer: D
NEW QUESTION 41
Which security implementation does Juniper Networks recommend for all core routers in a service provider network?
- A. application firewall
- B. unified threat management
- C. stateless loopback firewall filter
- D. intrusion and detection prevention
Answer: C
NEW QUESTION 42
Exhibit.
You are asked to ensure that most traffic that traverses your network is load balanced over all of the equal cost links between the routers in your network. However, you must also ensure that traffic from ISP A that is destined for ISP D must traverse the R1-R2-R3-R4-R5 path.
Referring to the exhibit how would you accomplish this task?
- A. Force the ISP A to ISP D traffic over RSVP-signaled LSPs.
- B. Adjust the BGFs LOCAL PREF attribute to ensure that the raw IP packets follow the required path.
- C. Adjust the OSPF metrics of each link so that the raw IP packets follow the required path.
- D. Force the ISP A to ISP D traffic over LDP-signaled LSPs.
Answer: A
NEW QUESTION 43
Which Juniper Networks platform automates the orchestration of compute, storage, and networking resources to create and manipulate OpenStack clouds?
- A. NorthStar
- B. RingMaster
- C. Contrail
- D. WANDL
Answer: C
NEW QUESTION 44
Which two statements about BFD are correct? (Choose two)
- A. NSR maintains BFD sessions during Routing Engine switchover.
- B. BFD provides link failure detection for static routes.
- C. GRES is required for BFD sessions to be established.
- D. BFD modifies each protocol timer to improve link failure detection.
Answer: A,B
Explanation:
https://www.juniper.net/documentation/en_US/junos/topics/topic-map/policy-bfd-static-routes.html
https://www.juniper.net/documentation/en_US/junos/topics/reference/requirements/nsr-systemrequireme nts.html#section-nonstop-routing-bfd-support
NEW QUESTION 45
......
JN0-1362 dumps - Dumpexams - 100% Passing Guarantee: https://www.dumpexams.com/JN0-1362-real-answers.html