Best Quality ISTQB CT-TAE Exam Questions Dumpexams Realistic Practice Exams [2024]
Critical Information To Certified Tester Test Automation Engineer Pass the First Time
NEW QUESTION # 32
Which of the following is NOT a technical design consideration for a TAA?
- A. Data used by the SUT, e.g configuration, users
- B. The number of users for the SUT
- C. Availability of interfaces for the SUT to be testable
- D. Standards and Legal requirements, e.g data privacy
Answer: B
NEW QUESTION # 33
You have been asked to develop test automation for a legacy system that is going to go through a series of infrastructure migrations. The scripts will be used to verify basic functionality during these infrastructure changes Your Test Analysts have some programming skills and need a solution that is simple and fast.
Maintainability of the scripts is not a consideration because no changes to the software are anticipated.
Which of the following is the BEST scripting approach in this situation?
- A. Capture-replay scripting
- B. Linear scripting
- C. Model-Based scripting
- D. Structured scripting
Answer: A
NEW QUESTION # 34
What is the PRIMARY advantage of using abstraction in the TAA?
- A. It ensures that any scripting method will be supported
- B. It makes it more flexible for future reuse and improvements
- C. It requires a higher skill level to implement
- D. It improves the performance of the TAS
Answer: B
Explanation:
Abstraction in Test Automation Architecture (TAA) is primarily advantageous because it allows for flexibility in the test automation framework, making it easier to reuse and improve upon. Abstraction helps in encapsulating the complexity of tests, which means changes in the system under test (SUT) may require minimal changes in the test scripts themselves. This level of abstraction also supports the scalability of the test automation, allowing for the addition of new tests or features with less effort.
References = The ISTQB Test Automation Engineer documents highlight the importance of abstraction in creating a maintainable and scalable test automation framework. The principles of abstraction align with the goals of test automation, which include efficiency, reusability, and ease of maintenance123.
NEW QUESTION # 35
You have executed an automated test suite for a product that was released into production. Although all the tests passed, there was a major failure in production in an area that was covered well by your automated tests.
You have run the automated tests again and one of the tests is now failing and this is directly related to the production defect that was raised. You decide to run the automated test suite again on the same version of the SUT and the test now passes.
What SHOULD you do now to verify the validity of the automated tests?
- A. Remove the intermittently failing test from the test suite and investigate the reason why the test sometimes passes and sometimes fails.
- B. Reference: https://www.researchgate.net/publication/341396240_Intermittently_Failing_Tests_in_the_Embedded_Systems_Domain
- C. Check that the production defect that was reported was an actual defect
- D. Run the automated test suite again and if the test now passes - do nothing
Answer: A
NEW QUESTION # 36
Consider a SUT that small run on multiple platform during the execution of automated test runs. In each test run an automated test suite needs to be executed, with the same version of the TAF, against the same version of the SUT of each platform. Each platform shall have its own dedicated test environment. Your goal is to implement a process as automated as possible ( i.e with minimal manual intervention) that allows implementing a consistent setup of the TAS across the multiple test environments.
Which two of the following aspects are MOST relevant for achieving your goal in this scenario?
The configuration of the TAS uses automated installation scripts
The TAF saves the logs needed to debug errors in XML format
C) Features of the TAF not used by the automated tests have been tested D) All the automated test cases contain the expected results E) The TAS components are under configuration management
- A. B and d
- B. B and c
- C. A and e
- D. A and d
Answer: C
NEW QUESTION # 37
Which of the following success factors for a test automation project is TRUE?
- A. Automated tests must be designed to capture only the data that is strictly needed for comparing expected and actual results
- B. The test cases to be automated must have a high dependency on particular data values
- C. The test cases to be automated first must always be selected based on the number of times a test will need to be run
- D. Automated tests that fail due to changes in the requirements of the SUT should be promptly fixed rather than disabled from the test suite
Answer: D
Explanation:
The success of a test automation project is contingent upon the maintenance and adaptability of the test suite to evolving requirements. When automated tests fail due to changes in the System Under Test (SUT), it is crucial to address these failures by updating the tests to align with the new requirements. This ensures that the test suite remains effective and relevant, providing accurate validation for the SUT. Disabling failing tests can lead to gaps in test coverage and diminish the integrity of the test suite, which is why prompt fixing is recommended over disabling.
References = The ISTQB Test Automation Engineer syllabus emphasizes the importance of maintaining and adapting test automation to meet new requirements. It outlines the need for test automation solutions to be designed, developed, and maintained with a focus on the dynamic nature of functional tests and their relationship to test management, configuration management, and defect management1234.
NEW QUESTION # 38
In order to achieve re-use of a TAS, where SHOULD the design for reuse occur?
- A. At the TAA level
- B. At the code level
- C. At the TAS level
- D. At the framework level.
Answer: A
Explanation:
The design for reuse of a Test Automation Solution (TAS) should primarily occur at the Test Automation Architecture (TAA) level. This is because the TAA defines the overall structure and design patterns that will be used throughout the TAS lifecycle. By focusing on reuse at the TAA level, it ensures that the test automation is designed with reuse in mind from the outset, which can increase the ability for reuse across different layers of the TAA.
References = The ISTQB Test Automation Engineer (CT-TAE) certification materials emphasize the importance of designing for reuse at the TAA level. It is noted that while reuse aspects are already settled when the TAA is defined, the TAS can help increase the ability for reuse. This information is corroborated by discussions and consensus in the professional community, as seen in the resources provided by ISTQB and other educational platforms12.
NEW QUESTION # 39
You have been asked to determine a TAS for a new release of a SUT, test should be automated wherever. The new release will consist of 5 new interfaces and an amendment to 3 existing interfaces. The new and amended interface will be deliver incrementally in 3 sprints, each lasting 2 weeks.
What would be the BEST Test Automation Solution (TAS) design in this scenario?
- A. Automate the tests at two levels, Component and System level. Create customized hooks at Component level for interface not yet developed or amended. Only use the newly developed or amended interfaces to test at System level.
- B. Automate tests at one level only, System level. Use only the newly developed interfaces and do not create any customized interfaces/test hooks.
- C. Automate tests at both Component and System Level. Only do this automation once every interface has been fully developed or amended and manual testing has completed successfully.
- D. Automate a test at once level, component level, Create customized interface/test hooks for this level where the interface has not yet been developed or amended.
Answer: A
Explanation:
The ISTQB Test Automation Engineer guidelines emphasize the importance of a Test Automation Architecture (TAA) that is flexible and maintainable. In the scenario described, automating tests at both the Component and System levels allows for early detection of defects and continuous integration of changes.
Customized hooks at the Component level enable testing of interfaces that are under development, which is crucial for incremental delivery in Agile environments. Testing only the newly developed or amended interfaces at the System level ensures that the automation is focused on the changes that are most relevant to the release.
References = The answer is based on the principles outlined in the ISTQB Test Automation Engineer syllabus, which discusses the design, development, and maintenance of test automation solutions, as well as the automation of dynamic functional tests and their relationship to test management, configuration management, defect management, software development processes, and quality assurance123.
NEW QUESTION # 40
What is the PRIMARY advantage of using abstraction in the TAA?
- A. It ensures that any scripting method will be supported
- B. It makes it more flexible for future reuse and improvements
- C. It requires a higher skill level to implement
- D. It improves the performance of the TAS
Answer: B
NEW QUESTION # 41
The GUI of a Customer Relationship Management (CRM) application has been delivered through internet Explorer with proprietary Active X and Java controls. This implementation enables rich client capabilities, but specific commercial automation tools are necessary to automate test cases at GUI of functional test cases. This is to demonstrate whether a small set of the commercial are able to properly recognize actions taken by a tester when interacting with GUI of the CRM application.
Which of the following scripting techniques would be MOST suitable in this scenario?
- A. Data-driven scripting
- B. Keyword-driven scripting
- C. Structure scripting
- D. Linear scripting
Answer: B
Explanation:
In the context of a CRM application with a GUI delivered through Internet Explorer using proprietary Active X and Java controls, keyword-driven scripting is the most suitable technique. This approach separates the test automation code from the test data, allowing for the creation of high-level keywords that represent user actions on the GUI. It is particularly effective in environments where specific commercial automation tools are necessary, as it enables non-technical testers to write automated test cases using a set of predefined keywords.
This method enhances the maintainability and reusability of test scripts, making it easier to adapt to changes in the GUI controls or the underlying application.
References = The ISTQB Test Automation Engineer syllabus and materials provide guidance on selecting appropriate scripting techniques based on the characteristics of the application under test and the test automation tools available. It discusses the advantages of keyword-driven scripting in scenarios where rich client capabilities are implemented and specific automation tools are required12.
NEW QUESTION # 42
If you are tracking the frequency that a test automation code reports a defect that is not really a defect, what metric are you gathering?
- A. The number of false-fail results
- B. Automation code defect density
- C. Tool scripting metrics
- D. Trend metrics
Answer: A
NEW QUESTION # 43
You are working as a TAE for a company who have been using a web test execution tool for a number of years. The tool has been used successfully on ten web applications in the past.
The company are developing a new web application which has a friendly User Interface, but the developers have used an object throughout the application which the tool is unable to recognise. As a result, you have no way of capturing the object or verifying the contents using the automation tool.
What is the first thing you should do about this problem?
- A. Ask the developers if they can change the object to something that can be recognised by the tool
- B. Ask the developers to remove the object and replace it with some text fields
- C. Investigate whether the object can be recognised by other test execution tools in the market
- D. See if the application can be run on a desktop and if the object can be recognised on the desktop by the tool.
Answer: C
NEW QUESTION # 44
You are executing the first test run of a test automation suite of 200 tests. All the relevant information related to the state of the SUT and to the automated test execution is stored in a small database. During the Automated test run you observe that the first 10 test pass, while an abnormal termination occurs when executing the 11th test. This test does not complete its execution and the overall execution of the suite is aborted. An immediate analysis of the abnormal termination is expected to be time consuming and you have been asked to produce a detailed report of the execution results for the first test run, as soon as possible.
What is the MOST important FIRST step to be taken immediately after the abnormal occurred when executing the 11th test?
- A. Return the database to a consistent state that allows subsequent test to run
- B. Re-run the test automation suite starting from the 12th test
- C. Re-run the test automation suite starting from the 1st test.
- D. Take a backup of the database in its current state. So It can be analyzed later
Answer: D
NEW QUESTION # 45
Designing the System Under Test (SUT) for testability is important for a good test automation approach and can also benefit manual test execution.
Which of the following is NOT a consideration when designing for testability?
- A. Re-useability: The code written for the SUT must be re-useable for other similar system.
- B. Clearly defined architecture: The SUT Architecture needs to provide clear and understandable interfaces giving control and visibility on all test levels.
- C. Observability: The SUT needs to provide interface that give insight into the system.
- D. Control: the SUT needs to provide interfaces that can be used to perform actions on SUT.
Answer: A
NEW QUESTION # 46
Which of the following CORRECTLY describes how automation SHOULD be applied to confirmation testing?
- A. Confirmation tests are not good candidates for automation as they are not designed to run many times
- B. A confirmation test should only be automated after it has been run manually
- C. Confirmation tests can be automated and incorporated into an automated regression suite to show whether defects that were previously fixed reoccur
- D. Confirmation tests should only be automated if they fail to pass on the first attempt
Answer: C
NEW QUESTION # 47
......
CT-TAE EXAM DUMPS WITH GUARANTEED SUCCESS: https://www.dumpexams.com/CT-TAE-real-answers.html
Best Quality ISTQB CT-TAE Exam Questions: https://drive.google.com/open?id=18DhpvQ4xhDUx0bdc-5SQQT7yhah9rVth