[Jan-2023] Latest MS-500 Exam Dumps for Pass Guaranteed [Q45-Q67]

[Jan-2023] Latest MS-500 Exam Dumps for Pass Guaranteed

Reliable Microsoft 365 MS-500 Dumps PDF Jan 15, 2023 Recently Updated Questions

NEW QUESTION 45
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some questions sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have an on-premises Active Directory domain named contoso.com.
You install and run Azure AD Connect on a server named Server1 that runs Windows Server.
You need to view Azure AD Connect events.
You use the System event log on Server1.
Does that meet the goal?

A. Yes
B. No

Answer: B

Explanation:
Explanation/Reference:
References:
https://support.pingidentity.com/s/article/PingOne-How-to-troubleshoot-an-AD-Connect-Instance

NEW QUESTION 46
You have a Microsoft 365 subscription.
You are creating a retention policy named Retention1 as shown in the following exhibit.
You apply Retention1 to SharePoint sites and OneDrive accounts.
Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic.
NOTE: Each correct selection is worth one point.

Answer:

Explanation:

Explanation

NEW QUESTION 47
You have the Microsoft conditions shown in the following table.

You have the Azure Information Protection labels shown in the following table.

You have the Azure Information Protection policies shown in the following table.

For each of the following statements, select Yes if the statement is true. Otherwise, select No.

Answer:

Explanation:

Explanation

NEW QUESTION 48
You have a Microsoft 365 tenant.
You need to retain Azure Active Directory (Azure AD) audit logs for two years. Administrators must be able to query the audit log information by using the Azure Active Directory admin center.
What should you do? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.

Answer:

Explanation:

Reference:
https://docs.microsoft.com/en-gb/azure/active-directory/reports-monitoring/howto-analyze-activity-logs-log-analytics

NEW QUESTION 49
You have the Microsoft conditions shown in the following table.

You have the Azure Information Protection labels shown in the following table.

You have the Azure Information Protection policies shown in the following table.

For each of the following statements, select Yes if the statement is true. Otherwise, select No.

Answer:

Explanation:

NEW QUESTION 50
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some questions sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have a Microsoft 365 subscription.
You have a user named User1. Several users have full access to the mailbox of User1.
Some email messages sent to User1 appear to have been read and deleted before the user viewed them.
When you search the audit log in Security & Compliance to identify who signed in to the mailbox of User1, the results are blank.
You need to ensure that you can view future sign-ins to the mailbox of User1.
You run the Set-AuditConfig -Workload Exchange command.
Does that meet the goal?

A. Yes
B. No

Answer: B

Explanation:
Reference:
https://docs.microsoft.com/en-us/powershell/module/exchange/policy-and-compliance-audit/set-auditconfig?view=exchange-ps

NEW QUESTION 51
You create a data loss prevention (DLP) policy as shown in the following shown:

What is the effect of the policy when a user attempts to send an email messages that contains sensitive information?

A. The email message is blocked silently
B. The user receives a notification and can send the email message
C. The email message is sent without a notification
D. The user receives a notification and cannot send the email message

Answer: B

Explanation:
Explanation
https://docs.microsoft.com/en-us/office365/securitycompliance/data-loss-prevention-policies

NEW QUESTION 52
Please wait while the virtual machine loads. Once loaded, you may proceed to the lab section. This may take a few minutes, and the wait time will not be deducted from your overall test time.
When the Next button is available, click it to access the lab section. In this section, you will perform a set of tasks in a live environment. While most functionality will be available to you as it would be in a live environment, some functionality (e.g., copy and paste, ability to navigate to external websites) will not be possible by design.
Scoring is based on the outcome of performing the tasks stated in the lab. In other words, it doesn't matter how you accomplish the task, if you successfully perform it, you will earn credit for that task.
Labs are not timed separately, and this exam may more than one lab that you must complete. You can use as much time as you would like to complete each lab. But, you should manage your time appropriately to ensure that you are able to complete the lab(s) and all other sections of the exam in the time provided.
Please note that once you submit your work by clicking the Next button within a lab, you will NOT be able to return to the lab.
Username and password

Use the following login credentials as needed:
To enter your username, place your cursor in the Sign in box and click on the username below.
To enter your password, place your cursor in the Enter password box and click on the password below.
Microsoft 365 Username:
admin@[email protected]
Microsoft 365 Password: #HSP.ug?$p6un
If the Microsoft 365 portal does not load successfully in the browser, press CTRL-K to reload the portal in a new browser tab.
The following information is for technical support only:
Lab instance: 11122308

You need to prevent any email messages that contain data covered by the U.K. Data Protection Act from being sent to recipients outside of your organization, unless the messages are sent to an external domain named adatum.com.
To complete this task, sign in to the Microsoft 365 admin center.

Answer:

Explanation:
1. After signing into the Microsoft 365 admin center, navigate to Compliance Management in the Exchange Admin center.
2. Click on "Data Loss Prevention" option.
3. To add a new custom DLP policy, Click on (+) plus button to get the context menu
4. Click on "New Custom DLP policy" option, a new window appears where you have to enter policy name, description, state and mode of the requirement details. Click on save button to create policy and continue...
5. You will be back to the "Data Loss Prevention" screen with newly added policy information.
6. Double click on the added row to open the policy details, click on rules option in left part of the screen as depicted
7. Click on (+) plus button to add a new rule. Select the "Block messages with sensitive information" rule.
8. On the following screen, we can add condition, action, exceptions, rule activation and deactivation dates

9. Click on "Select Sensitive information Types" to specify the sensitive information details.

10. Click on (+) plus button and add the following Sensitive information Types:
* U.K. National Insurance Number (NINO
* U.S. / U.K. Passport Number
* SWIFT Code
11. Click on Ok
12. Add an exception for recipients in the adatum.com domain
13. Add recipients for incident reports and click ok
14. Click save
15. Click save
Reference:
https://events.collab365.community/configure-data-loss-prevention-policies-in-exchange-online-in-office-365/

NEW QUESTION 53
You have a Microsoft Azure Active Directory (Azure AD) tenant named contoso.com that contains the users shown in the following table.

You create and enforce an Azure AD Identity Protection sign-in risk policy that has the following settings:
Assignments: Include Group1, Exclude Group2
Conditions: Sign in risk of Low and above
Access: Allow access, Require password multi-factor authentication
You need to identify how the policy affects User1 and User2.
What occurs when each user signs in from an anonymous IP address? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.

Answer:

Explanation:

NEW QUESTION 54
You need to recommend an email malware solution that meets the security requirements.
What should you include in the recommendation? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.

Answer:

Explanation:

Explanation

NEW QUESTION 55
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have a Microsoft 365 subscription that contains the users shown in the following table.

You discover that all the users in the subscription can access Compliance Manager reports.
The Compliance Manager Readerrole is not assigned to any users.
You need to recommend a solution to prevent a user named User5 from accessing the Compliance Manager reports.
Solution: You recommend assigning the Compliance Manager Reader role to User1.
Does this meet the goal?

A. Yes
B. No

Answer: B

NEW QUESTION 56
You need to create a policy that identifies content in Microsoft OneDrive that contains credit card numbers.
To complete this task, sign in to the Microsoft 365 portal.

Answer:

Explanation:
See explanation below.
Explanation
You need to configure auto-labeling in 'simulation' mode. In the policy, you can select the 'Credit Card' sensitive info type.
* In the Microsoft 365 compliance center, navigate to sensitivity labels:
Solutions > Information protection
* Select the Auto-labeling (preview) tab.
* Select + Create policy.
* For the page Choose info you want this label applied to: Select one of the templates, such as Financial or Privacy. You can refine your search by using the Show options for dropdown. Or, select Custom policy if the templates don't meet your requirements. Select Next.
* For the page Name your auto-labeling policy: Provide a unique name, and optionally a description to help identify the automatically applied label, locations, and conditions that identify the content to label.
* For the page Choose locations where you want to apply the label: Select OneDrive. Then select Next.
* For the Define policy settings Find content that contains to define rules that identify content to label across all your selected locations. The rules use conditions that include sensitive information types and sharing options. For sensitive information types, you can select both built-in and custom sensitive information types.
* Then select Next.
* For the Set up rules to define what content is labeled + Create rule and then select Next.
* On the Create rule page, name and define your rule, using sensitive information types and then select Save.
* Click Next.
* For the Choose a label to auto-apply , select a label from the Choose a sensitivity label pane, and then select
* For the Decide if you want to run policy simulation now or later page: Select Run policy in simulation mode if you're ready to run the auto-labeling policy now, in simulation mode. Otherwise, select Leave policy turned off. Select Next.
* For the Summary page: Review the configuration of your auto-labeling policy and make any changes that needed, and complete the wizard.
Reference:
https://docs.microsoft.com/en-us/microsoft-365/compliance/apply-sensitivity-label-automatically?view=o365-wo

NEW QUESTION 57
You have a Microsoft Azure Active Directory (Azure AD) tenant named contoso.com.
Four Windows 10 devices are joined to the tenant as shown in the following table.

On which devices can you use BitLocker To Go and on which devices can you turn on auto-unlock? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.

Answer:

Explanation:

Explanation

NEW QUESTION 58
You have a Microsoft 365 subscription that uses a default domain name of contoso.com.
Microsoft Azure Active Directory (Azure AD) contains the users shown in the following table.

Microsoft Intune has two devices enrolled as shown in the following table:

Both devices have three apps named App1, App2, and App3 installed.
You create an app protection policy named ProtectionPolicy1 that has the following settings:
* Protected apps: App1
* Exempt apps: App2
* Windows Information Protection mode: Block
You apply ProtectionPolicy1 to Group1 and Group3. You exclude Group2 from ProtectionPolicy1.
For each of the following statements, select Yes if the statement is true. Otherwise, select No.
NOTE: Each correct selection is worth one point.

Answer:

Explanation:

NEW QUESTION 59
You have a Microsoft 365 E5 subscription that is linked to an Azure Active Directory (Azure AD) tenant named contoso.com. The tenant contains three groups named Group!, Group2. and Group3 and the users shown in the following table.

You create a new access package as shown in the following exhibit.
You have a Microsoft 365 E5 subscription that uses Microsoft Endpoint Manager. The Compliance policy settings are configured as shown in the following exhibit.
These settings configure the way the compliance service treats devices. Each device evaluates these as a "Built-in Device Compliance Policy", which is reflected in device monitoring.

Answer:

Explanation:

NEW QUESTION 60
You have an Azure Active Directory (Azure AD) tenant named contoso.com that contains the users shown in the following table.

You add internal as a blocked word in the group naming policy for contoso.com.
You add Contoso- as prefix in the group naming policy for contoso.com.
For each of the following statements, select Yes if the statement is true. Otherwise, select No.
NOTE: Each correct selection is worth one point.

Answer:

Explanation:

Reference:
https://docs.microsoft.com/en-us/microsoft-365/solutions/groups-naming-policy?view=o365-worldwide

NEW QUESTION 61
Please wait while the virtual machine loads. Once loaded, you may proceed to the lab section. This may take a few minutes, and the wait time will not be deducted from your overall test time.
When the Next button is available, click it to access the lab section. In this section, you will perform a set of tasks in a live environment. While most functionality will be available to you as it would be in a live environment, some functionality (e.g., copy and paste, ability to navigate to external websites) will not be possible by design.
Scoring is based on the outcome of performing the tasks stated in the lab. In other words, it doesn't matter how you accomplish the task, if you successfully perform it, you will earn credit for that task.
Labs are not timed separately, and this exam may more than one lab that you must complete. You can use as much time as you would like to complete each lab. But, you should manage your time appropriately to ensure that you are able to complete the lab(s) and all other sections of the exam in the time provided.
Please note that once you submit your work by clicking the Next button within a lab, you will NOT be able to return to the lab.
Username and password

Use the following login credentials as needed:
To enter your username, place your cursor in the Sign in box and click on the username below.
To enter your password, place your cursor in the Enter password box and click on the password below.
Microsoft 365 Username:
admin@[email protected]
Microsoft 365 Password: &=Q8v@2qGzYz
If the Microsoft 365 portal does not load successfully in the browser, press CTRL-K to reload the portal in a new browser tab.
The following information is for technical support only:
Lab instance: 11032396
You need to ensure that a user named Alex Wilber can register for multifactor authentication (MFA).
To complete this task, sign in to the Microsoft Office 365 admin center.

Answer:

Explanation:
See explanation below.
Explanation
Enable Modern authentication for your organization
1. To enable modern authentication, from the admin center, select Settings > Settings and then in the Services tab, choose Modern authentication from the list.
2. Check the Enable modern authentication box in the Modern authentication panel.

Enable multi-factor authentication for your organization
1. In the admin center, select Users and Active Users.
2. In the Active Users section, Click on multi-factor authentication.
3. On the Multi-factor authentication page, select user if you are enabling this for one user or select Bulk Update to enable multiple users.
4. Click on Enable under Quick Steps.
5. In the Pop-up window, Click on Enable Multi-Factor Authentication.
After you set up multi-factor authentication for your organization, your users will be required to set up two-step verification on their devices.
Reference:
https://docs.microsoft.com/en-us/microsoft-365/admin/security-and-compliance/set-up-multi-factor-authenticatio

NEW QUESTION 62
You have a Microsoft 365 E5 subscription that contains the users shown in the following table.

You plan to implement Azure Active Directory (Azure AD) Identity Protection.
You need to identify which users can perform the following actions:
Configure a user risk policy.
View the risky users report.
Which users should you identify? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.

Answer:

Explanation:

Reference:
https://docs.microsoft.com/en-us/azure/active-directory/identity-protection/overview-identity-protection

NEW QUESTION 63
An administrator configures Azure AD Privileged Identity Management as shown in the following exhibit.

What should you do to meet the security requirements?

A. From the Azure Active Directory admin center, remove the Exchange administrator role to Admin1
B. Change the Assignment Type for Admin1 to Eligible
C. From the Azure Active Directory admin center, assign the Exchange administrator role to Admin2
D. Change the Assignment Type for Admin2 to Permanent

Answer: B

NEW QUESTION 64
You have a Microsoft 365 subscription that uses a default domain name of contoso.com.
The multi-factor authentication (MFA) service settings are configured as shown in the exhibit. (Clock the Exhibit tab.)

In contoso.com, you create the users shown in the following table.

What is the effect of the configuration? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.

Answer:

Explanation:

NEW QUESTION 65
You have a Microsoft 365 E5 subscription that contains the users shown in the following table.

You need to identify which user can enable Microsoft Defender Advanced Threat Protection (Microsoft Defender ATP) roles.
Which user should you identify?

A. User4
B. User2
C. User3
D. User1

Answer: B

Explanation:
Reference:
https://docs.microsoft.com/en-us/windows/security/threat-protection/microsoft-defender-atp/rbac

NEW QUESTION 66
Your network contains an on-premises Active Directory domain that syncs to Azure Active Directory (Azure AD) as shown in the following exhibit.

The synchronization schedule is configured as shown in the following exhibit.

Use the drop-down menus to select the answer choice that answers each question based on the information presented in the graphic.
NOTE: Each correct selection is worth one point.