[Oct-2021] Pass Microsoft MS-500 Exam in First Attempt Guaranteed!
Full MS-500 Practice Test and 231 unique questions with explanations waiting just for you, get it now!
NEW QUESTION 121
You have a Microsoft 365 subscription.
A customer requests that you provide her with all documents that reference her by name.
You need to provide the customer with a copy of the content.
Which four actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Explanation:
Explanation
Reference:
https://docs.microsoft.com/en-us/microsoft-365/compliance/gdpr-dsr-office365
NEW QUESTION 122
You have a Microsoft 365 subscription that uses a default domain name of contoso.com.
Microsoft Azure Active Directory (Azure AD) contains the users shown in the following table.
Microsoft Intune has two devices enrolled as shown in the following table:
Both devices have three apps named App1, App2, and App3 installed.
You create an app protection policy named ProtectionPolicy1 that has the following settings:
* Protected apps: App1
* Exempt apps: App2
* Windows Information Protection mode: Block
You apply ProtectionPolicy1 to Group1 and Group3. You exclude Group2 from ProtectionPolicy1.
For each of the following statements, select Yes if the statement is true. Otherwise, select No.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation
NEW QUESTION 123
You need to recommend an email malware solution that meets the security requirements.
What should you include in the recommendation? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation
NEW QUESTION 124
Which policies apply to which devices? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation
NEW QUESTION 125
You configure Microsoft Azure Active Directory (Azure AD) Connect as shown in the following exhibit.
Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation
Reference:
https://docs.microsoft.com/en-us/azure/active-directory/hybrid/how-to-connect-device-writeback
NEW QUESTION 126
Your company has a Microsoft 365 subscription that contains the users shown in the following table.
The company implements Windows Defender Advanced Threat Protection (Windows Defender ATP).
Windows Defender ATP includes the roles shown in the following table:
Windows Defender ATP contains the machine groups shown in the following table:
For each of the following statements, select Yes if the statement is true. Otherwise, select No.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation
NEW QUESTION 127
You view Compliance Manager as shown in the following exhibit.
Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation
Reference:
https://docs.microsoft.com/en-us/office365/securitycompliance/meet-data-protection-and-regulatory-reqs-using-m
NEW QUESTION 128
Please wait while the virtual machine loads. Once loaded, you may proceed to the lab section. This may take a few minutes, and the wait time will not be deducted from your overall test time.
When the Next button is available, click it to access the lab section. In this section, you will perform a set of tasks in a live environment. While most functionality will be available to you as it would be in a live environment, some functionality (e.g., copy and paste, ability to navigate to external websites) will not be possible by design.
Scoring is based on the outcome of performing the tasks stated in the lab. In other words, it doesn't matter how you accomplish the task, if you successfully perform it, you will earn credit for that task.
Labs are not timed separately, and this exam may more than one lab that you must complete. You can use as much time as you would like to complete each lab. But, you should manage your time appropriately to ensure that you are able to complete the lab(s) and all other sections of the exam in the time provided.
Please note that once you submit your work by clicking the Next button within a lab, you will NOT be able to return to the lab.
Username and password
Use the following login credentials as needed:
To enter your username, place your cursor in the Sign in box and click on the username below.
To enter your password, place your cursor in the Enter password box and click on the password below.
Microsoft 365 Username:
admin@[email protected]
Microsoft 365 Password: &=Q8v@2qGzYz
If the Microsoft 365 portal does not load successfully in the browser, press CTRL-K to reload the portal in a new browser tab.
The following information is for technical support only:
Lab instance: 11032396
You need to ensure that group owners renew their Office 365 groups every 180 days.
To complete this task, sign in to the Microsoft Office 365 admin center.
Answer:
Explanation:
Set group expiration
1. Open the Azure AD admin center with an account that is a global administrator in your Azure AD organization.
2. Select Groups, then select Expiration to open the expiration settings.
3. On the Expiration page, you can:
* Set the group lifetime in days. You could select one of the preset values, or a custom value (should be
31 days or more).
* Specify an email address where the renewal and expiration notifications should be sent when a group has no owner.
* Select which Office 365 groups expire. You can set expiration for:
* All Office 365 groups
* A list of Selected Office 365 groups
* None to restrict expiration for all groups
Save your settings when you're done by selecting Save.
Reference:
https://docs.microsoft.com/en-us/azure/active-directory/users-groups-roles/groups-lifecycle
NEW QUESTION 129
You have a Microsoft 365 subscription. Auditing is enabled.
A user named User1 is a member of a dynamic security group named Group1.
You discover that User1 is no longer a member of Group1.
You need to search the audit log to identify why User1 was removed from Group1.
Which two actions should you use in the search? To answer, select the appropriate activities in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation
References:
https://docs.microsoft.com/en-us/office365/securitycompliance/search-the-audit-log-in-security-and-compliance
NEW QUESTION 130
You have a Microsoft 365 Tenant.
A conditional access policy is configured for the tenant as shown in the Policy exhibit. (Click the Policy tab.)
The User Administrator role a configured as shown in the Hole setting exhibit (Click the Role setting tab.)
The User Administrator role has the assignments shown in the Assignments exhibit (Click the Assignments tab.)
For each of the following statements, select yes If the statement is true. Otherwise select No.
NOTE Each correct selection is worth one point.
Answer:
Explanation:
Explanation
NEW QUESTION 131
You have a Microsoft 365 subscription that uses a default domain name of fabrikam.com.
You create a safe links policy, as shown in the following exhibit.
Which URL can a user safely access from Microsoft Word Online?
- A. malware.fabrikam.com
- B. fabrikam.contoso.com
- C. www.malware.fabrikam.com
- D. fabrikam.phishing.fabrikam.com
Answer: C
Explanation:
Explanation
References:
https://docs.microsoft.com/en-us/office365/securitycompliance/set-up-a-custom-blocked-urls-list-wtih-atp
NEW QUESTION 132
You have a Microsoft 365 tenant.
User attributes are synced from your company's human resources (HR) system to Azure Active Directory (Azure AD).
The company has four departments that each has its own Microsoft SharePoint Online site. Each site must be accessed only by the users from its respective department.
You are designing an access management solution that has the following requirements:
* Users must be added automatically to the security group of their department.
* All security group owners must verify once quarterly that only the users in their department belong to their group.
Which components should you recommend to meet the requirements? To answer, drag the appropriate components to the correct requirements. Each component may only be used once, more than once, or not at all.
You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Reference:
https://cloudbuild.co.uk/tag/create-a-dynamic-security-group-in-azure-ad/
https://docs.microsoft.com/en-us/azure/active-directory/governance/access-reviews-overview
NEW QUESTION 133
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some questions sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have an on-premises Active Directory domain named contoso.com.
You install and run Azure AD Connect on a server named Server1 that runs Windows Server.
You need to view Azure AD Connect events.
You use the Security event log on Server1.
Does that meet the goal?
- A. No
- B. Yes
Answer: A
Explanation:
Explanation/Reference:
References:
https://support.pingidentity.com/s/article/PingOne-How-to-troubleshoot-an-AD-Connect-Instance
NEW QUESTION 134
You have a Microsoft 365 E5 subscription.
A security manager receives an email message every time a data loss prevention (DLP) policy match occurs.
You need to limit alert notifications to actionable DLP events.
What should you do?
- A. From the Security & Compliance admin center, modify the matched activities threshold of an alert policy.
- B. From the Security & Compliance admin center, modify the User overrides settings of a DLP policy.
- C. From the Cloud App Security admin center, apply a filter to the alerts.
- D. From the Security & Compliance admin center, modify the Policy Tips settings of a DLP policy.
Answer: A
Explanation:
Explanation/Reference:
https://docs.microsoft.com/en-us/office365/securitycompliance/alert-policies
NEW QUESTION 135
You have aMicrosoft 365 subscription that contains 1,000 user mailboxes.
An administrator named Admin1 must be able to search for the name of a competing company in the mailbox of a user named User5.
You need to ensure that Admin1 can search the mailbox of User5 successfully. The solution must prevent Admin1 from sending User5.
Solution: You assign the eDiscovery Manager role to Admin1, and then create an eDiscovery case.
Does this meet the goal?
- A. No
- B. Yes
Answer: B
Explanation:
Explanation
References:
https://docs.microsoft.com/en-us/exchange/policy-and-compliance/ediscovery/ediscovery?view=exchserver-201
NEW QUESTION 136
Please wait while the virtual machine loads. Once loaded, you may proceed to the lab section. This may take a few minutes, and the wait time will not be deducted from your overall test time.
When the Next button is available, click it to access the lab section. In this section, you will perform a set of tasks in a live environment. While most functionality will be available to you as it would be in a live environment, some functionality (e.g., copy and paste, ability to navigate to external websites) will not be possible by design.
Scoring is based on the outcome of performing the tasks stated in the lab. In other words, it doesn't matter how you accomplish the task, if you successfully perform it, you will earn credit for that task.
Labs are not timed separately, and this exam may more than one lab that you must complete. You can use as much time as you would like to complete each lab. But, you should manage your time appropriately to ensure that you are able to complete the lab(s) and all other sections of the exam in the time provided.
Please note that once you submit your work by clicking the Next button within a lab, you will NOT be able to return to the lab.
Username and password
Use the following login credentials as needed:
To enter your username, place your cursor in the Sign in box and click on the username below.
To enter your password, place your cursor in the Enter password box and click on the password below.
Microsoft 365 Username:
admin@[email protected]
Microsoft 365 Password: #HSP.ug?$p6un
If the Microsoft 365 portal does not load successfully in the browser, press CTRL-K to reload the portal in a new browser tab.
The following information is for technical support only:
Lab instance: 11122308
You need to ensure that a user named Allan Deyoung receives incident reports when email messages that contain data covered by the U.K. Data Protection Act are sent outside of your organization.
To complete this task, sign in to the Microsoft 365 admin center.
Answer:
Explanation:
See explanation below.
Explanation
1. In the Security & Compliance Center > left navigation > Data loss prevention > Policy > + Create a policy.
2. Choose the U.K. Data Protection Act template > Next.
3. Name the policy > Next.
4. Choose All locations in Office 365 > Next.
5. At the first Policy Settings step just accept the defaults,
6. After clicking Next, you'll be presented with an additional Policy Settings page Deselect the Show policy tips to users and send them an email notification option.
Select the Detect when content that's being shared contains option, and configure the number instances to be 10.
Select the Send incident reports in email
Select the Choose what to include in the report and who receives it link to add Allan Deyoung as a recipient.
7. > Next
8. Select the option to turn on the policy right away >
9. Click Create to finish creating the policy.
Reference:
https://docs.microsoft.com/en-us/microsoft-365/compliance/create-test-tune-dlp-policy?view=o365-worldwide
https://docs.microsoft.com/en-us/microsoft-365/compliance/data-loss-prevention-policies?view=o365-worldwide
https://docs.microsoft.com/en-us/microsoft-365/compliance/what-the-dlp-policy-templates-include?view=o365-w
NEW QUESTION 137
You have a Microsoft 365 subscription that contains an Azure Active Directory (Azure AD) tenant named contoso.com.
You need to recommend an Azure AD Privileged Identity Management (PIM) solution that meets the following requirements:
Administrators must be notified when the Security administrator role is activated.
Users assigned the Security administrator role must be removed from the role automatically if they do not sign in for 30 days.
Which Azure AD PIM setting should you recommend configuring for each requirement? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Reference:
https://docs.microsoft.com/bs-latn-ba/azure/active-directory/privileged-identity-management/pim-how-to-configure-security-alerts?tabs=new
https://docs.microsoft.com/bs-latn-ba/azure/active-directory/privileged-identity-management/pim-how-to-change-default-settings?tabs=new
NEW QUESTION 138
How should you configure Group3? To answer, select the appropriate options in the answer area.
NOTE:Each correct selection is worth one point.
Answer:
Explanation:
Explanation
NEW QUESTION 139
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some questions sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have an on-premises Active Directory domain named contoso.com.
You install and run Azure AD Connect on a server named Server1 that runs Windows Server.
You need to view Azure AD Connect events.
You use the System event log on Server1.
Does that meet the goal?
- A. No
- B. Yes
Answer: A
NEW QUESTION 140
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have a Microsoft 365 E5 subscription that is associated to a Microsoft Azure Active Directory (Azure AD) tenant named contoso.com.
You use Active Directory Federation Services (AD FS) to federate on-premises Active Directory and the tenant.
Azure AD Connect has the following settings:
* Source Anchor: objectGUID
* Password Hash Synchronization: Disabled
* Password writeback: Disabled
* Directory extension attribute sync: Disabled
* Azure AD app and attribute filtering: Disabled
* Exchange hybrid deployment: Disabled
* User writeback: Disabled
You need to ensure that you can use leaked credentials detection in Azure AD Identity Protection.
Solution: You modify the Azure AD app and attribute filtering settings.
Does that meet the goal?
- A. No
- B. Yes
Answer: A
Explanation:
Explanation
NEW QUESTION 141
Please wait while the virtual machine loads. Once loaded, you may proceed to the lab section. This may take a few minutes, and the wait time will not be deducted from your overall test time.
When the Next button is available, click it to access the lab section. In this section, you will perform a set of tasks in a live environment. While most functionality will be available to you as it would be in a live environment, some functionality (e.g., copy and paste, ability to navigate to external websites) will not be possible by design.
Scoring is based on the outcome of performing the tasks stated in the lab. In other words, it doesn't matter how you accomplish the task, if you successfully perform it, you will earn credit for that task.
Labs are not timed separately, and this exam may more than one lab that you must complete. You can use as much time as you would like to complete each lab. But, you should manage your time appropriately to ensure that you are able to complete the lab(s) and all other sections of the exam in the time provided.
Please note that once you submit your work by clicking the Next button within a lab, you will NOT be able to return to the lab.
Username and password
Use the following login credentials as needed:
To enter your username, place your cursor in the Sign in box and click on the username below.
To enter your password, place your cursor in the Enter password box and click on the password below.
Microsoft 365 Username:
admin@[email protected]
Microsoft 365 Password: #HSP.ug?$p6un
If the Microsoft 365 portal does not load successfully in the browser, press CTRL-K to reload the portal in a new browser tab.
The following information is for technical support only:
Lab instance: 11122308
You need to create an eDiscovery case that places a hold on the mailbox of a user named Allan Deyoung. The hold must retain email messages that have a subject containing the word merger or the word Contoso.
To complete this task, sign in to the Microsoft 365 admin center.
Answer:
Explanation:
See explanation below.
Explanation
1. Navigate to eDiscovery in the Security & Compliance Center, and then click Create a case.
2. On the New Case page, give the case a name, type an optional description, and then click Save. The case name must be unique in your organization.
The new case is displayed in the list of cases on the page. You can hover the cursor over a case name to display information about the case, including the status of the case (Active or Closed), the description of the case (that was created in the previous step), and when the case was changed last and who changed it.
To create a hold for an eDiscovery case:
1. In the Security & Compliance Center, click to display the list of cases in your organization.
2. Click Open next to the case that you want to create the holds in.
3. On the Home page for the case, click the Hold tab.
4. On the Hold page, click Create.
5. On the Name your hold page, give the hold a name. The name of the hold must be unique in your organization.
6. (Optional) In the Description box, add a description of the hold.
7. Click Next.
8. Choose the content locations that you want to place on hold. You can place mailboxes, sites, and public folders on hold.
* Exchange email - Click Choose users, groups, or teams and then click Choose users, groups, or
* teams again. to specify mailboxes to place on hold. Use the search box to find user mailboxes and distribution groups (to place a hold on the mailboxes of group members) to place on hold. You can also place a hold on the associated mailbox for a Microsoft Team, a Yammer Group, or an Office 365 Group.
Select the user, group, team check box, click Choose, and then click Done.
Note
When you click Choose users, groups, or teams to specify mailboxes to place on hold, the mailbox picker that's displayed is empty. This is by design to enhance performance. To add people to this list, type a name (a minimum of 3 characters) in the search box.
9. After configuring a query-based hold, click
10. Review your settings, and then click
Reference:
https://docs.microsoft.com/en-us/microsoft-365/compliance/ediscovery-cases?view=o365-worldwide#step-4-pla
NEW QUESTION 142
Your network contains an on-premises Active Directory domain named contoso.com. The domain contains the groups shown in the following table.
The domain is synced to a Microsoft Azure Active Directory (Azure AD) tenant that contains the groups shown in the following table.
You create an Azure Information Protection policy named Policy1.
You need to apply Policy1.
To which groups can you apply Policy1? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation
Reference:
https://docs.microsoft.com/en-us/azure/information-protection/prepare
NEW QUESTION 143
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have a Microsoft 365 subscription that contains 1,000 user mailboxes.
An administrator named Admin1 must be able to search for the name of a competing company in the mailbox of a user named User5.
You need to ensure that Admin1 can search the mailbox of User5 successfully. The solution must prevent Admin1 from sending email messages as User5.
Solution: You modify the permissions of the mailbox of User5, and then create an eDiscovery case.
Does this meet the goal?
- A. No
- B. Yes
Answer: A
Explanation:
Explanation/Reference:
https://docs.microsoft.com/en-us/exchange/policy-and-compliance/ediscovery/ediscovery?view=exchserver-
2019
NEW QUESTION 144
How should you configure Group3? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
NEW QUESTION 145
......
Prepare for your Microsoft certification with the updated Dumpexams MS-500 exam questions: https://drive.google.com/open?id=1ff0ugN0rz-DyIlzbc_kc0CCorjV4m2WQ
Get Latest MS-500 Dumps Exam Questions in here: https://www.dumpexams.com/MS-500-real-answers.html