[Oct-2023] 100% Actual 300-510 dumps Q&As with Explanations Verified & Correct Answers
300-510 Dumps with Free 365 Days Update Fast Exam Updates
Cisco 300-510 certification exam is designed to test the knowledge and skills of professionals who are responsible for implementing advanced routing solutions in a service provider network. 300-510 exam is part of the Cisco Certified Specialist - Service Provider Advanced Routing Implementation certification track and covers topics such as routing protocols, VPN technologies, and network automation. Passing 300-510 exam demonstrates a candidate's expertise in implementing complex routing solutions in a service provider environment.
How to book the Implementing Cisco Service Provider Advanced Routing Solutions (300-510 SPRI) Exam
Typically, up to six weeks in advance and as late as the same day, you can schedule an exam. You must follow these steps to participate in the Implementing Cisco Service Provider Advanced Routing Solutions 300-510 SPRI exam test:
- Step 1: Visit the Pearson VUE website by clicking here
- Step 3: Login or create an account
- Step 3: Enter the exam number i.e., 300-510
- Step 3: Follow the details on the website
- Step 4: Pay for your exam via credit card or exam vouchers
Introduction to Implementing Cisco Service Provider Advanced Routing Solutions (300-510 SPRI) Exam
It is a 90-minute test affiliated with the CCNP Service Provider and Cisco Accredited Professional-Service Provider VPN Services Implementation certifications. Implementing Cisco Service Provider Advanced Routing Solutions (300-510 SPRI) exam tests the candidate's knowledge of integrating VPN services, including Layer 2, Layer 3, and IPv6, from the service provider. Different types of 310-510 SPRI practice test helps the students to prepare for the exam.
NEW QUESTION # 37
Compare different features between OSPFv2 and OSPFv3. Drag and drop the descriptions of OSPF from the left onto the correct OSPF versions on the right.
Answer:
Explanation:
NEW QUESTION # 38
Refer to the exhibit.
Refer to the exhibit A network engineer configured the redistribute connected subnets route-map filtering command on R1 to redistribute connected interfaces to the OSPF process The engineer also wants to filter out IP address 10 0 1 0/24. but the prefix still appears in the routing tables of the other routers on the network. Which action corrects the problem?
- A. Remove the subnets keyword from the redistribute connected subnets route-map filtering command.
- B. Add a set statement to route-map sequence 20.
- C. Change the deny statement in access list 2 to permit
- D. Remove route-map sequence 30.
Answer: C
NEW QUESTION # 39
Drag and drop the attributes for the BGP route selection on the left into the correct order on the right. Not all options are used.
Answer:
Explanation:
NEW QUESTION # 40
Which difference must an engineer consider when choosing whether to implement OSPF or IS-IS as the routing protocol on the network?
- A. The OSPF DR election process is deterministic, and the IS-IS DS election process is not deterministic.
- B. IS-IS links are associated with either a Level 1 area or a Level 2 area at one time, but OSPF links are associated with multiple areas at one time.
- C. To support fast convergence. OSPF uses the LSA arrival timer and IS-IS uses the PRC-interval timer.
- D. IS-IS supports ordinary, stub, totally-stub. and NSSA areas, but OSPF supports only stub areas.
Answer: C
NEW QUESTION # 41
Refer to the exhibit. A network operator is working to filter routes from being advertised that are covered under an aggregate announcement.
The receiving router of the aggregate announcement block is still getting some of the more specific routes plus the aggregate.
Which configuration change ensures that only the aggregate is announced now and in the future if other networks are to be added?
- A. Set each specific route in the AGGRO policy to drop instead of suppress-route
- B. Filter the routes on the receiving router
- C. Configure the summary-only keyword on the aggregate command
- D. Set each specific route in the AGGRO policy to remove instead of suppress-route
Answer: C
NEW QUESTION # 42
Which statement about enabling segment routing for IGPs is true?
- A. Segment routing must first be enabled globally and then under the routing process
- B. Segment routing must first be enabled under then routing process and then globally
- C. Segment routing can be enabled only under the routing process
- D. Segment routing can be enabled only globally
Answer: A
Explanation:
Reference:
book/sr-ospfv2-node-sid.html
NEW QUESTION # 43
Which statement about BFD on Cisco IOS XR Software is true?
- A. Cisco IOS XR Software does not support BFD multihop for IPv4.
- B. BFD is not compatible between Cisco IOS XR and Cisco IOS Software.
- C. Cisco IOS XR router must use LDP to route back to the Cisco IOS router to establish the peer relationship.
- D. Cisco IOS XR router must use dynamic routing or a static route back to the Cisco IOS router to establish the peer relationship.
Answer: D
Explanation:
https://www.cisco.com/c/en/us/td/docs/routers/asr9000/software/asr9k-r6-
3/routing/configuration/guide/b-routing-cg-asr9000-63x/b-routing-cg-asr9000-
63x_chapter_0100.html
NEW QUESTION # 44
Refer to the exhibit.
After these configurations were applied to routers R1 and R2. the two devices cannot form a neighbor relationship What is the reason tor the problem?
- A. The two routers have the same network ID
- B. The two routers cannot authenticate with one another
- C. The two routers have the same area ID.
- D. The two routers have different iS-types
Answer: B
NEW QUESTION # 45
Refer to the exhibit.
There is a connectivity issue between Customer-1 and Customer-2 File servers between the customers cannot send critical data R3 routes are missing from the routing table on the Customer-1 router All interlaces on Customer-1 are up Which configuration must be applied to router R2 to correct the problem?
- A. Option C
- B. Option D
- C. Option B
- D. Option A
Answer: B
NEW QUESTION # 46
Refer to the exhibit.
After you applied these configurations to routers R1 and R2, the two devices could not form a neighbor relationship. Which reason for the problem is the most likely?
- A. The two routers have the same network ID.
- B. The two routers have different IS-types.
- C. The two routers have the same area ID.
- D. The two routers cannot authenticate with one another.
Answer: A
Explanation:
For those asking about the password, area authentication doesn't prevent neighboring to come up because it is carried only in LSP, CSNP and PSNP messages and not in IIH messages. https://www.cisco.com/c/en/us/support/docs/ip/integrated-intermediate-system-to-intermediate-system-is-is/13792-isis-authent.html
NEW QUESTION # 47
Refer to the exhibit. When implementing SRv6, which SID does R2 propagate into area 0 for the prefix 2001:DB8:1:1/128?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
NEW QUESTION # 48
Refer to the exhibit.
Router 1 is connected to router 2 on interface TenGigE0/1. Which interface provides the alternate path to 172.16.200.9/32 when the link between router 1 and router 2 goes down?
- A. A primary path must be manually installed
- B. TenGigE0/1 interface provides the alternate path
- C. TenGigE0/2 interface provides the alternate path
- D. A backup path must be statically installed
Answer: C
NEW QUESTION # 49
Refer to the exhibit.
Which attribute can router 1 alter so that only other iBGP peers prefer to use 192.168.4.2 as the next hop for route 192.168.3.0/24?
- A. MED
- B. origin
- C. weight
- D. local preference
Answer: A
NEW QUESTION # 50
For which reason can two devices fail to establish an OSPF neighbor relationship?
- A. The two devices have different process IDs
- B. The two devices have the same area ID
- C. The two devices have different router IDs
- D. The two devices have different network types
Answer: D
Explanation:
Reference:
https://www.cisco.com/c/en/us/support/docs/ip/open-shortest-path-first-ospf/13699-29.html
NEW QUESTION # 51
Refer to the exhibit. An engineer is troubleshooting connectivity issues on the MPLS core network. A customer connected through R4 cannot reach the OSPF domain on R5. While checking the routing table of R1, the engineer cannot see all the routes from R3 and R5. Which task must the engineer perform so that R4 is able to reach R5?
- A. Enable OSPF peering and configure route redistribution between routers R4 and R1.
- B. Enable OSPF on the Area-0 routers and configure MP-BGP between routers R1 and R3.
- C. Enable route filtering between routers R1 and R3.
- D. Enable MP-BGP peering on routers R1, R3, R4, and R5.
Answer: D
NEW QUESTION # 52
Refer to the exhibit.
How are packets directed through the data plane when SRv6 is implemented?
- A. A stack of labels represents an ordered list of segments
- B. An ordered list of segments is encoded in a routing extension header
- C. The MPLS data plane is used to push labels onto IGP routes
- D. The packet is encapsulated with a header and trailer encoding the ordered list of segments
Answer: B
NEW QUESTION # 53
Refer to the exhibit. All routers on this network have been configured with P1M-SM and R1 is the rendezvous point. However, when asymmetric routing is implemented to modify link usage the network begins to drop certain multicast traffic. Which action corrects the problem?
- A. Remove the asymmetric routing and use spanning tree to manage link usage.
- B. Place the routes affected by asymmetric routing in a VRF.
- C. Configure the routers to use PIM-DM instead of PIM-SM.
- D. Add a static Mroute for routes that are failing.
Answer: D
NEW QUESTION # 54
Which two statements about mapping multicast IP addresses to MAC addresses are true?
(Choose two.)
- A. The router performs the mapping before it hands the packet off to a switch
- B. The mapping process may generate overlapping addresses, which can cause receivers to receive unwanted packets
- C. All mapped multicast MAC addresses begin with 0x0100.5E
- D. All multicast MAC addresses end with 0x0100.5E
- E. All destination MAC addresses begin with an octet of binary 1s
Answer: B,C
NEW QUESTION # 55
Refer to the exhibit.
Refer to the exhibit There is a BGP traffic path issue between Customer-1 and Customer-2 Users from Customer-2 have reported file transfer issues High utilization on the path between both customers causes many packet drops. Which configuration resolves the issue?
- A. Option C
- B. Option B
- C. Option D
- D. Option A
Answer: B
NEW QUESTION # 56
An engineer is troubleshooting end-to-end customer traffic across an MPLS VPN service provider network. Which tasks should the engineer use to solve the routing issues? Drag and drop the table types from the left onto the most useful troubleshooting tasks/router types on the right. (Not all options are used.)
Answer:
Explanation:
NEW QUESTION # 57
......
Verified 300-510 dumps Q&As - 2023 Latest 300-510 Download: https://www.dumpexams.com/300-510-real-answers.html
Dumps Questions [2023] Pass for 300-510 Exam: https://drive.google.com/open?id=1PGssEUokGEda03BKWH1fMdVrjDa2C_rp